14L Motor Grader Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g02695948

1. Remove bolts (1), bolts (2) and the straps to remove drive shaft (3).

   Note: Discard bolts (1) and (2).

Installation Procedure

Show/hide table

Illustration 2	g02695948

1. Position drive shaft (3), the straps, and install new bolts (2). Refer to Table 1 for the correct torque specification for bolts (2).

2. Install the straps and new bolts (1). Refer to Table 1 for the correct torque specification for bolts (1).
   Show/hide table

   Table 1

   Torque Table
   Bolt Size	Torque Specification
   M10x1.25	71 ± 10 N·m (52 ± 7 lb ft)
   M12x1.75	120 ± 20 N·m (89 ± 15 lb ft)