Radiator Core - Remove and Install
Removal Procedure
Start By:
- Remove the radiator tank. Refer to Disassembly and Assembly, "Radiator Tank - Remove and Install".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Open door assemblies (1) .
Show/hide table
 | |
| Illustration 1 | g01385690 |
- Remove bolts (2) .
Show/hide table
 | |
| Illustration 2 | g01385699 |
- Disconnect hoses (3) .
Show/hide table
 | |
| Illustration 3 | g01385705 |
- Remove retainer (4) .
Show/hide table
 | |
| Illustration 4 | g01385710 |
- Remove core assembly (5) .
- Remove seal (6) .
Show/hide table
 | |
| Illustration 5 | g01385722 |
- Repeat Steps 2 through Step 6 for the remaining cores.
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 207-1601 | Rubber Lubricant | 1 |
- Apply Tooling (A) onto seal (6). Install seal (6) .
Show/hide table
| | |
| Illustration 6 | g01385722 |
- Apply Tooling (A). Install radiator core (5) .
Show/hide table
| | |
| Illustration 7 | g01385710 |
- Install retainer (4) .
- Connect hoses (3) .
Show/hide table
| | |
| Illustration 8 | g01385705 |
- Install bolts (2) .
Show/hide table
| | |
| Illustration 9 | g01385699 |
- Repeat Steps 1 through Step 5 for the remaining cores.
- Close door assemblies (1) .
Show/hide table
| | |
| Illustration 10 | g01385690 |
End By: Install the radiator tank. Refer to Disassembly and Assembly, "Radiator Tank - Remove and Install".
Caterpillar Information System:
AS3251C Asphalt Screed Main Frame
AccuGrade® Compaction GPS Mapping and Measurement System Controller - MC024 and Alpha30
WAVS Installation Guide for Generic Applications{7347, 7348} WAVS Installation Guide for Generic Applications{7347, 7348}
CB14 Paving Compactor Machine Systems Diaphragm Pump (Water Spray) - Remove and Install
CS54 and CP54 Vibratory Soil Compactors Cooling System Coolant (ELC) - Change
AS3301C Asphalt Screed End Gate
160M Motor Grader Power Train Transmission - Remove
CB14 Paving Compactor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
14L Motor Grader Drive Shaft - Remove and Install
2007/06/18 An Updated Procedure for Starting the Engine of a Skid Steer Loader or Multi Terrain Loader is Available {1000, 7000}
120M and 12M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan)
2007/07/09 Use of Dry Lubricant is Recommended {0645, 7301}
AS3251C Asphalt Screed Extension Lines Group
CS54 and CP54 Vibratory Soil Compactors Cooling System Coolant Extender (ELC) - Add
CS54 and CP54 Vibratory Soil Compactors Battery or Battery Cable - Inspect/Replace
C4.4 (MECH) Industrial Engine and Generator Sets Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
C6.6 Engines For Caterpillar Built Machines CID 1589 FMI 03
C6.6 Engines For Caterpillar Built Machines CID 1589 FMI 04
2007/06/04 Patterns for the Joystick Can Be Customized {5705}
AS3251C Asphalt Screed Vibratory Lines Group
CB14 Paving Compactor Machine Systems Water Filter - Remove and Install
CS54 and CP54 Vibratory Soil Compactors Cooling System Coolant Level - Check
770 and 772 Off-Highway Trucks Engine Supplement Cowling (Radiator) - Remove and Install
CB14 Paving Compactor Machine Systems Operator Platform - Remove and Install