Radiator Core - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
B     | 178-3704     | 起重支架组件     | 1     |
开始:
- 拆下后冷器。 请参阅拆解和组装, "后冷器 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将冷却液排入适当的容器以便储存或弃置。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
- 拆下螺栓 (1) 。
Show/hide table
图 1 | g01385477 |
- 将适当的起吊设备固定到制冷剂冷凝器 (2) 上。 制冷剂冷凝器 (2) 的重量约为 27 kg (60 lb)。
Show/hide table
图 2 | g01385683 |
- 拆下螺栓 (3) 。 将制冷剂冷凝器 (2) 和挡板放到一旁。
- 松开夹箍 (5) 。 卸下软管 (4) 。
Show/hide table
图 3 | g01385684 |
- 拆下螺栓 (6) 和螺栓 (8) 。 拆下风扇护罩 (7) 。
Show/hide table
图 4 | g01385689 |
- 断开软管组件 (10) 。 拆下螺栓 (9) 、 (11) 和 (12) 。
Show/hide table
图 5 | g01385695 |
Show/hide table
图 6 | g01385696 |
- 将工具 (A) 固定到散热器水箱 (13) 上。 散热器水箱 (13) 的重量约为 55 kg (121 lb)。 拆下散热器水箱 (13) 。
Show/hide table
图 7 | g01385730 |
- 将密封 (4) 从散热器水箱 (13) 上拆下。
Show/hide table
图 8 | g01385738 |
- 将工具 (B) 固定到散热器芯 (15) 上。 散热器芯 (15) 的重量约为 28 kg (62 lb)。 拆下散热器芯 (15) 。
Show/hide table
图 9 | g01385742 |
- 拆下密封件 (16) 。
Show/hide table
图 10 | g01385751 |
Caterpillar Information System:
120M and 12M Motor Graders Braking and Hydraulic Fan System Brake Accumulator Charging Valve - Check
140M Motor Grader Engine Supplement Flywheel Housing - Remove and Install
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan) Margin Pressure - Test and Adjust
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan) High Pressure Stall - Test and Adjust
938H Wheel Loader and IT38H Integrated Toolcarrier Braking and Hydraulic Fan System Service Brakes
CB14 Paving Compactor Machine Systems Direction and Speed Control - Install
CB14 Paving Compactor Machine Systems Direction and Speed Control - Remove
587R Pipelayer Machine Systems Gear Pump (Counterweight) - Assemble
587R Pipelayer Machine Systems Gear Pump (Counterweight) - Disassemble
770 and 772 Off-Highway Trucks Engine Supplement Aftercooler - Install
770 and 772 Off-Highway Trucks Engine Supplement Aftercooler - Remove
C6.6 Engines For Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
770 and 772 Off-Highway Trucks Engine Supplement Radiator Core - Install
120M and 12M Motor Graders Braking and Hydraulic Fan System Control Manifold (Brake, Hydraulic Fan)
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
CB14 Paving Compactor Machine Systems Lifting Gp - Remove and Install
AS3251C Asphalt Screed Operator Platform
2007/07/09 Use of Dry Lubricant is Recommended {0645, 7301}
120M and 12M Motor Graders Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan)
2007/06/18 An Updated Procedure for Starting the Engine of a Skid Steer Loader or Multi Terrain Loader is Available {1000, 7000}
14L Motor Grader Drive Shaft - Remove and Install
CB14 Paving Compactor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
160M Motor Grader Power Train Transmission - Remove
AS3301C Asphalt Screed End Gate