Hydraulic Oil Cooler - Remove and Install
Removal Procedure
Start By:
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
- Remove the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant into a suitable container for proper storage or disposal. Refer to Operation and Maintenance Manual, "Coolant - Drain".
- Drain the hydraulic tank into a suitable container for proper storage or disposal. Refer to Operation and Maintenance Manual, "Hydraulic Tank - Drain".
- Disconnect hose assembly (1) .
Show/hide table
 | |
| Illustration 1 | g01384087 |
- Disconnect hose assembly (3). Position adapter (2) out of the way.
Show/hide table
 | |
| Illustration 2 | g01384089 |
- Place a suitable container under plug (4). Remove plug (4). Allow coolant to drain. Install plug (4) .
Show/hide table
 | |
| Illustration 3 | g01384090 |
- Remove bolt (5) .
Show/hide table
 | |
| Illustration 4 | g01384187 |
- Attach a suitable lifting device onto hydraulic oil cooler (7). The weight of hydraulic oil cooler is approximately 36 kg (80 lb). Remove bolts (6). Remove hydraulic oil cooler (7) .
Show/hide table
 | |
| Illustration 5 | g01384193 |
Installation Procedure
- Attach a suitable lifting device onto hydraulic oil cooler (7). The weight of hydraulic oil cooler is approximately 36 kg (80 lb). Remove bolts (6). Install hydraulic oil cooler (7) .
Show/hide table
| | |
| Illustration 6 | g01384193 |
- Install bolt (5) .
Show/hide table
| | |
| Illustration 7 | g01384187 |
- Position adapter (2). Connect hose assembly (3).
Show/hide table
| | |
| Illustration 8 | g01384089 |
- Install hose assembly (1) .
Show/hide table
| | |
| Illustration 9 | g01384087 |
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic Tank - Fill".
- Fill the radiator with coolant. Refer to Operation and Maintenance Manual, "Coolant - Fill".
End By: Install the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Caterpillar Information System:
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Differential and Final Drive Oil - Change
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Assemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Install
16M Motor Grader Engine Supplement Engine Oil Cooler - Remove and Install
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Remove
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Install
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Remove
CS54 and CP54 Vibratory Soil Compactors Engine Starting
2007/06/04 New Hubs in the Output Transfer Gear Are Now Used {3159}
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CB22, CB24, CB32 and CC24 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
120K Motor Grader Operator Controls
2008/01/28 Weld Procedure for Field Repair of Certain Large Off-Highway Truck Differential Housings {3260}
Assembly Procedure for the 793 X body{7258, 7960} Assembly Procedure for the 793 X body{7258, 7960}
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Lifting and Tying Down the Machine
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines Fuel Transfer Pump - Test
770 and 772 Off-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
16M Motor Grader Power Train Drive Shaft - Remove and Install
2007/08/06 An Improved Valve Kit is Available For the Compensator Valve {5051}
CB14 Paving Compactor Machine Systems Piston Pump (Propel) - Remove
450E Backhoe Loader Machine Systems Multipurpose Bucket - Remove and Install