Engine Oil Cooler - Remove and Install
拆卸步骤
开始:
- 拆下发动机机油滤清器底座。 请参阅拆解与组装, "发动机机油滤清器底座 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 为便于安装，在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 检查 O 形密封圈。 更换过度磨损或损坏的 O 型密封圈。
- 拆下管组件 (1) 。
Show/hide table
 | |
| 图 1 | g01384066 |
- 断开软管 (2) 。 拆下支架 (3) 。
Show/hide table
 | |
| 图 2 | g01384074 |
- 卸下螺栓 (4) 。 拆下发动机机油冷却器 (5) 。
Show/hide table
 | |
| 图 3 | g01384081 |
- 拆下 O 形密封圈 (6) 。 断开软管 (7) 。 拆下阀帽 (8) 。
Show/hide table
 | |
| 图 4 | g01384085 |
- 拆下 O 形密封圈 (9) 。
Show/hide table
 | |
| 图 5 | g01384086 |
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装 O 形密封圈 (9) 。
Show/hide table
| | |
| 图 6 | g01384086 |
- 安装阀帽 (8) 。 连接软管 (7) 。 安装 O 形密封圈 (6) 。
Show/hide table
| | |
| 图 7 | g01384085 |
- 安装发动机机油冷却器 (5) 。 安装螺栓 (4) 。
Show/hide table
| | |
| 图 8 | g01384081 |
- 安装支架 (3) 。 连接软管 (2) 。
Show/hide table
| | |
| 图 9 | g01384074 |
- 安装管组件 (1) 。
Show/hide table
| | |
| 图 10 | g01384066 |
End By: 安装发动机机油滤清器底座。 请参阅 拆解和组装, "发动机机油滤清器底座 - 安装"。
Caterpillar Information System:
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Remove
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Install
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Remove
CS54 and CP54 Vibratory Soil Compactors Engine Starting
2007/06/04 New Hubs in the Output Transfer Gear Are Now Used {3159}
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CB22, CB24, CB32 and CC24 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
CB14 Paving Compactor Machine Systems Steering Frame Lock - Separate and Connect
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Priority Valve (Steering)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Stabilizer) (Pilot Operated)
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)(Pilot Operated)
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Install
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Assemble
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Differential and Final Drive Oil - Change
587R Pipelayer Engine Supplement Hydraulic Oil Cooler - Remove and Install
120K Motor Grader Operator Controls
2008/01/28 Weld Procedure for Field Repair of Certain Large Off-Highway Truck Differential Housings {3260}
Assembly Procedure for the 793 X body{7258, 7960} Assembly Procedure for the 793 X body{7258, 7960}
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Lifting and Tying Down the Machine
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines Fuel Transfer Pump - Test