Differential and Final Drive Oil - Change
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 卸下排放螺塞。 将一个适当的排放接头连接到一个软管上。 将排放接头装到每个排放阀内。 将油排放到适当的容器中。
- 从排放阀上卸下排放接头。
- 清洁并安装排放螺塞。
注: 如果机器配有车桥油冷却器,则需要清洗 2 个磁性滤清器。 如果机器未配有车桥油冷却器,转至下一步。
Show/hide table图 3 g01384244 前磁性油滤清器 Show/hide table图 4 g01384247 后磁性油滤清器 - 拆下前滤清器的磁性塞。 用清洁的、不易燃的溶剂清洗磁性塞。 安装磁性塞。 对后部的滤清器重复此步骤。
Show/hide table
图 5 g00989672 前车桥油尺/加注螺塞 Show/hide table图 6 g00989674 后车桥油尺/加注螺塞 - 擦净油尺/加注口塞及油尺/加注口塞周围的表面。
- 拆下油尺/加注口塞。 向每个车桥添加
0.5 L (0.5 qt) 的 1U-9891 液压油添加剂。 向车桥加注润滑油。参考: 有关润滑剂的种类和加注容量,请参阅 操作和保养手册 , "润滑剂粘度和加注容量 "
- 清洁并安装油尺/加注口塞。
- 在平地上运转机器几分钟,以使车桥内的油位均衡。 检查车桥内的油位。
参考: 关于正确的检查程序,请参阅 操作和保养手册 , "差速器和终传动油位 - 检查"。
Show/hide table
图 1 | g00989676 |
不带车桥油冷却器的机器 |
Show/hide table
图 2 | g00630605 |
带车桥油冷却器的机器 |
注: 车桥壳体配备了环保放油阀。
Caterpillar Information System:
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Assemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Install
16M Motor Grader Engine Supplement Engine Oil Cooler - Remove and Install
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Remove
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Install
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Remove
CS54 and CP54 Vibratory Soil Compactors Engine Starting
2007/06/04 New Hubs in the Output Transfer Gear Are Now Used {3159}
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CB22, CB24, CB32 and CC24 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
CB14 Paving Compactor Machine Systems Steering Frame Lock - Separate and Connect
587R Pipelayer Engine Supplement Hydraulic Oil Cooler - Remove and Install
120K Motor Grader Operator Controls
2008/01/28 Weld Procedure for Field Repair of Certain Large Off-Highway Truck Differential Housings {3260}
Assembly Procedure for the 793 X body{7258, 7960} Assembly Procedure for the 793 X body{7258, 7960}
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Lifting and Tying Down the Machine
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines Fuel Transfer Pump - Test
770 and 772 Off-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
16M Motor Grader Power Train Drive Shaft - Remove and Install
2007/08/06 An Improved Valve Kit is Available For the Compensator Valve {5051}
CB14 Paving Compactor Machine Systems Piston Pump (Propel) - Remove