Gear Pump (Steering and Vibratory) - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Description     | Qty     |
A     | 1P-1859     | Retaining Ring Pliers     | 1     |
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Install seals (18) and (19) to plate (14) .
Show/hide table
Illustration 1 | g01388809 |
Show/hide table
Illustration 2 | g01388801 |
- Repeat Step 1 on plate (15) .
- Install plates (14) and (15) to gears (13) and (16) .
- Install shaft (17) to gear (16) .
- Install gear set (12) to housing (1) .
Show/hide table
Illustration 3 | g01388799 |
- Install guide pins (11) from housing (1) .
- Install O-ring seal (10) to section (3) .
Show/hide table
Illustration 4 | g01388939 |
- Turn over section (3) and install housing (1) .
Show/hide table
Illustration 5 | g01388544 |
- Install O-ring seal (8) and dowel pins (9) to section (3) .
- Use a suitable press and install bearing (6) to shaft (5) .
Show/hide table
Illustration 6 | g01392187 |
- Use Tooling (A) and install clip (7) .
- Use a suitable press and remove shaft (5) from section (4) .
Show/hide table
Illustration 7 | g01388938 |
- Install section (4) to section (3) and housing (1). Install bolts (2) .
End By: Install the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Steering and Vibratory) - Install".
Caterpillar Information System:
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Install
16M Motor Grader Engine Supplement Engine Oil Cooler - Remove and Install
CB14 Paving Compactor Machine Systems Gear Pump (Steering and Vibratory) - Remove
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Install
770 and 772 Off-Highway Trucks Engine Supplement Oil Cooler (Engine) - Remove
CS54 and CP54 Vibratory Soil Compactors Engine Starting
2007/06/04 New Hubs in the Output Transfer Gear Are Now Used {3159}
770 and 772 Off-Highway Trucks Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
CB22, CB24, CB32 and CC24 Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
CB14 Paving Compactor Machine Systems Steering Frame Lock - Separate and Connect
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Priority Valve (Steering)
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Differential and Final Drive Oil - Change
587R Pipelayer Engine Supplement Hydraulic Oil Cooler - Remove and Install
120K Motor Grader Operator Controls
2008/01/28 Weld Procedure for Field Repair of Certain Large Off-Highway Truck Differential Housings {3260}
Assembly Procedure for the 793 X body{7258, 7960} Assembly Procedure for the 793 X body{7258, 7960}
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Lifting and Tying Down the Machine
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines Fuel Transfer Pump - Test
770 and 772 Off-Highway Trucks Engine Supplement Oil Filter and Base (Engine) - Remove and Install
16M Motor Grader Power Train Drive Shaft - Remove and Install
2007/08/06 An Improved Valve Kit is Available For the Compensator Valve {5051}