Hood and Dust Ejector - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 3 |
- Remove ejector assembly (1) .
Show/hide table
 | |
| Illustration 1 | g01381331 |
- Remove precleaner assembly (2) .
Show/hide table
 | |
| Illustration 2 | g01381340 |
- Attach Tooling (A) and a suitable lifting device onto hood (3). The weight of hood (3) is approximately 54 kg (120 lb).
Show/hide table
 | |
| Illustration 3 | g01381342 |
- Disconnect harness assemblies (4) and (5) .
Show/hide table
 | |
| Illustration 4 | g01381352 |
- Remove bolts (6) .
Show/hide table
 | |
| Illustration 5 | g01381353 |
- Remove bolt (7) .
Show/hide table
 | |
| Illustration 6 | g01381357 |
- Remove bolts (9). Remove plates (8) .
Show/hide table
 | |
| Illustration 7 | g01381455 |
- Repeat Step 6 for the opposite side.
- Remove hood (3) .
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 3 |
- Attach Tooling (A) and a suitable lifting device onto hood (3). The weight of hood (3) is approximately 54 kg (120 lb).
Show/hide table
| | |
| Illustration 8 | g01381342 |
- Install hood (3) .
- Install plates (8). Install bolts (9).
Show/hide table
| | |
| Illustration 9 | g01381455 |
- Repeat Step 3 for the opposite side.
- Install bolt (7) .
Show/hide table
| | |
| Illustration 10 | g01381357 |
- Install bolts (6) .
Show/hide table
| | |
| Illustration 11 | g01381353 |
- Connect harness assemblies (4) and (5) .
Show/hide table
| | |
| Illustration 12 | g01381352 |
- Install precleaner assembly (2) .
Show/hide table
| | |
| Illustration 13 | g01381340 |
- Install ejector assembly (1) .
Show/hide table
| | |
| Illustration 14 | g01381331 |
Caterpillar Information System:
450E Backhoe Loader Machine Systems Extendable Stick - Remove and Install
16M Motor Grader Machine Systems Circle - Remove
2009/12/11 A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1405, 1425}
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head Valves
AccuGrade® Laser (CB420) CB 36 Left Elevation Sensor Missing
AccuGrade® Laser (CB420) CB 34 VM Fault
AccuGrade® Laser (CB420) CB 33 VM Fault
587R Pipelayer Engine Supplement Engine Side Guards - Remove and Install
AccuGrade® Laser (CB420) CB 32 ECM Disconnected
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Visual Inspection
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems Relief Valve (Steering) - Test and Adjust
120M and 12M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan System
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover
416E, 420E and 430E Backhoe Loaders Transmission (Standard Shift) Solenoid Valve (Standard Shift)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Transmission (Standard Shift) Solenoid Valve (Standard Shift)
16M Motor Grader Machine Systems Circle - Install
587R Pipelayer Machine Systems Flushing Valve - Disassemble
2007/07/16 An Improved Elbow in the Air Lines Group Has Increased Durability {1071}
587R Pipelayer Machine Systems Flushing Valve - Assemble
2007/06/18 An Improved Tube Assembly Is Now Used for the Air Conditioning System {7320}
C6.6 Engines For Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Equipment Lowering with Engine Stopped
160M Motor Grader Engine Supplement Rear Chassis Support - Remove
2007/06/04 A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1154, 1405, 1425}