Valve Mechanism Cover
Show/hide table
图 1 | g01393882 |
Show/hide table
图 2 | g01393915 |
摇臂盖底座的拧紧顺序 |
Show/hide table
图 3 | g01394066 |
气门机构盖的拧紧顺序 |
(1) 按所示数字顺序拧紧摇臂盖底座的螺栓至以下扭矩。 ... 14 ± 4 N·m (125 ± 35 lb in)
(2) 按所示数字顺序拧紧摇臂盖底座的螺栓至以下扭矩。 ... 14 ± 4 N·m (125 ± 35 lb in)
注: 安装前,先在密封 (5) 的两端涂抹 3S-6252 密封剂 。
(3) 将摇臂盖底座的密封切至以下长度。 ... 1847.9 ± 6.4 mm (72.75 ± 0.25 in)
(4) 将气门机构盖的密封切至以下长度。 ... 1765.3 ± 6.4 mm (69.50 ± 0.25 in)
Caterpillar Information System:
587R Pipelayer Engine Supplement Hood and Dust Ejector - Remove and Install
450E Backhoe Loader Machine Systems Extendable Stick - Remove and Install
16M Motor Grader Machine Systems Circle - Remove
2009/12/11 A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1405, 1425}
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Head Valves
AccuGrade® Laser (CB420) CB 36 Left Elevation Sensor Missing
AccuGrade® Laser (CB420) CB 34 VM Fault
AccuGrade® Laser (CB420) CB 33 VM Fault
587R Pipelayer Engine Supplement Engine Side Guards - Remove and Install
AccuGrade® Laser (CB420) CB 32 ECM Disconnected
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Visual Inspection
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems Relief Valve (Steering) - Test and Adjust
416E, 420E and 430E Backhoe Loaders Transmission (Standard Shift) Solenoid Valve (Standard Shift)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Transmission (Standard Shift) Solenoid Valve (Standard Shift)
16M Motor Grader Machine Systems Circle - Install
587R Pipelayer Machine Systems Flushing Valve - Disassemble
2007/07/16 An Improved Elbow in the Air Lines Group Has Increased Durability {1071}
587R Pipelayer Machine Systems Flushing Valve - Assemble
2007/06/18 An Improved Tube Assembly Is Now Used for the Air Conditioning System {7320}
C6.6 Engines For Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Equipment Lowering with Engine Stopped
160M Motor Grader Engine Supplement Rear Chassis Support - Remove
2007/06/04 A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1154, 1405, 1425}
CB14 Vibratory Compactor C1.1 Engine Supplement Engine Enclosure (Hood) - Remove and Install