Propel Cable - Remove and Install
Removal Procedure
- Loosen jam nut (1). Remove cotter pin (2) and pin (3). Remove cable assembly (4) from the pumps.
Show/hide table
Illustration 1 | g01010949 |
- Remove screws (6) and cover (5) .
Show/hide table
Illustration 2 | g01021152 |
- Remove nut (8) and the clamp that fastens cable assembly (4) to the propel lever.
Show/hide table
Illustration 3 | g01021155 |
- Remove cotter pin (7) that fastens cable assembly (4) to the propel lever.
- Remove cable assembly (4) from the operator platform.
Installation Procedure
- Install cable assembly (4) through the bottom of the operator platform.
Show/hide table
Illustration 4 | g01021155 |
- Install cotter pin (7) that fastens cable assembly (4) to the propel lever.
- Install the clamp and nut (8) that fastens cable assembly (4) to the propel lever.
- Install cover (5) and screws (7) .
Show/hide table
Illustration 5 | g01021152 |
- Install cable assembly (4). Install pin (3) and cotter pin (2). Tighten jam nut (1) .
Show/hide table
Illustration 6 | g01010949 |
Caterpillar Information System:
CP54 and CS54 Vibratory Soil Compactors Machine Systems Cab - Install
AS3251C Asphalt Screed Gear Motor (Vibratory)
3500C Marine Engines Engine Speed/Timing Sensor
AP655D and BG655D Asphalt Pavers Paver Blade - If equipped
AccuGrade® GPS (CD700) Horizontal Guidance
CP54 and CS54 Vibratory Soil Compactors Machine Systems Cab - Remove
Salvage Procedure for the Hydraulic Ejector Cylinder on some Articulated Trucks {5305} Salvage Procedure for the Hydraulic Ejector Cylinder on some Articulated Trucks {5305}
RM-500 Soil Stabilizer Sound Information and Vibration Information
2007/05/14 A New Service Guideline for the Inspection and Replacement of the Flexible Mounts is Now Available on Soil Compactors and Paving Compactors {5654, 6605, 6606, 6607}
CP-533E and CS-533E Vibratory Soil Compactors Sound Information and Vibration Information
2007/07/16 Managing the Life Cycles of Excavator Final Drives {4050}
450E Backhoe Loader Engine Supplement Fan Drive - Remove and Install
AccuGrade® GPS (CD700) Designs
2007/06/04 Improvements to the Water Lines Groups {1380}
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Breaker Relief Valve
AccuGrade® GPS (CD700) Level Surface Design
2007/04/30 An Improved Starting Motor is Now Available {1453}
160M Motor Grader Engine Supplement Engine Enclosure (Hood) - Remove
160M Motor Grader Engine Supplement Engine Enclosure (Hood) - Install
AccuGrade® GPS (CD700) Sloping Surface Design
AP655D Asphalt Paver Engine Starting
587R Pipelayer Power Train Final Drive, Steering Clutch and Brake - Remove
The Hydraulic Float Function For the Three-Point Hitch is Causing Poor Actuation.{5051, 5702, 5705} The Hydraulic Float Function For the Three-Point Hitch is Causing Poor Actuation.{5051, 5702, 5705}
AccuGrade® GPS (CD700) Configuration