Usage:
Depth that all cup plugs are installed (measured from head face to top edge of plug) ... 1.25 ± 0.25 mm (.049 ± .010 in)
Cylinder head bolt tightening sequence:
NOTE: Lubricate bolts with 2P2506 Thread Lubricant prior to assembly.
a. Tighten bolts 1 thru 26 by numerical sequence to a torque of ... 150 ± 15 N·m (110 ± 11 lb ft)
b. Tighten bolts 1 thru 26 by numerical sequence to a torque of ... 275 ± 15 N·m (200 ± 11 lb ft)
c. Retighten bolts 1 thru 26 by numerical sequence to a torque of ... 275 ± 15 N·m (200 ± 11 lb ft)
d. Tighten bolts 27 thru 33 by numerical sequence to a torque of ... 25 ± 7 N·m (18 ± 5 lb ft)
Cylinder head height (new) ... 105.00 ± 0.15 mm (4.134 ± .006 in)
NOTE: Flatness of the cylinder head should be within 0.30 mm (.012 in) total, and a maximum of 0.05 mm (.002 in) for any 150.00 mm (5.906 in) span.