Usage:
Start By:
a. remove cylinder head assembly
NOTICE |
---|
The lift guide springs can be assembled on the lifter assembly or installed in the cylinder head lifter bore only once. If a lifter assembly is removed from the cylinder head or a lift guide spring is removed from a lifter assembly, a new lifter guide spring must be installed at assembly. |
1. Pull lifter assemblies (1) out of the cylinder head lifter bore.
2. Remove the guide springs from the lifter assemblies.
NOTE: The following steps are for the installation of the lifter assemblies.
3. Install guide spring (2) on each of lifter assemblies (1).
4. Put lifter assemblies (1) in a container of clean engine oil before they are installed. Install lifter assemblies (1) in the lifter bore of the cylinder head.
End By:
a. install cylinder head assembly