Piston Cooling Jets
Usage:
Remove And Install Piston Cooling Jet
1. Remove the cover from the side of the engine block.
2. Remove bolts (1) and retainer (2).
3. Pull cooling jet (3) out of its bore in the engine block from the inside to remove it.
NOTE: The following steps are for installation of the piston cooling jet.
4. Put cooling jet (3) in position in the engine block. Make sure the oil holes in the end of the jet are toward the piston.
5. Install retainer (2) and bolts (1) to hold jet (3) in position.
6. Install the cover on the side of the engine block.
Caterpillar Information System:
3500 GENERATOR SET ENGINES Valve Guides
3500 GENERATOR SET ENGINES Valve Seat Inserts
3500 GENERATOR SET ENGINES Bridge Dowels
3500 GENERATOR SET ENGINES Valve Lifters
3500 GENERATOR SET ENGINES Valves
3500 GENERATOR SET ENGINES Spacer Plates
3500 GENERATOR SET ENGINES Cylinder Head Assemblies
3500 GENERATOR SET ENGINES Fuel Injection Control Linkage
3500 GENERATOR SET ENGINES Fuel Injectors
3500 GENERATOR SET ENGINES Rocker Shaft Assemblies
3500 GENERATOR SET ENGINES Rocker Shaft Assemblies And Push Rods
3500 GENERATOR SET ENGINES Valve Covers
3500 GENERATOR SET ENGINES Connecting Rod Bearings
3500 GENERATOR SET ENGINES Front Balancer Group (3508)
3500 GENERATOR SET ENGINES Rear Gear Group
3500 GENERATOR SET ENGINES Crankshaft Main Bearings
3500 GENERATOR SET ENGINES Pistons And Connecting Rod Assemblies
3500 GENERATOR SET ENGINES Cylinder Liners
3500 GENERATOR SET ENGINES Camshafts
3500 GENERATOR SET ENGINES Camshaft Bearings
3500 GENERATOR SET ENGINES Crankshaft
CONTROL PANEL SR4 GENERATOR MOUNTED Identification
CONTROL PANEL SR4 GENERATOR MOUNTED Abbreviations
CONTROL PANEL SR4 GENERATOR MOUNTED Symbols