Valve Seat Inserts
Usage:
Remove And Install Valve Seat Inserts
*Part of 6V4805 Extractor Group
Start By:
a. remove valves
1. Remove the valve seat inserts from the cylinder head with tooling (A).
2. Clean and remove any burrs from the valve seat bores.
NOTE: The following steps are for installation of the valve seat inserts.
3. Lower the temperature of valve seat inserts (1), and install them with tooling (B).
4. Grind valve seat inserts (1) to the values given in the Specifications Manual.
End By:
a. install valves
Caterpillar Information System:
3500 GENERATOR SET ENGINES Bridge Dowels
3500 GENERATOR SET ENGINES Valve Lifters
3500 GENERATOR SET ENGINES Valves
3500 GENERATOR SET ENGINES Spacer Plates
3500 GENERATOR SET ENGINES Cylinder Head Assemblies
3500 GENERATOR SET ENGINES Fuel Injection Control Linkage
3500 GENERATOR SET ENGINES Fuel Injectors
3500 GENERATOR SET ENGINES Rocker Shaft Assemblies
3500 GENERATOR SET ENGINES Rocker Shaft Assemblies And Push Rods
3500 GENERATOR SET ENGINES Valve Covers
3500 GENERATOR SET ENGINES Oil Sequence Valves
3500 GENERATOR SET ENGINES Flywheel Housing
3500 GENERATOR SET ENGINES Valve Guides
3500 GENERATOR SET ENGINES Piston Cooling Jets
3500 GENERATOR SET ENGINES Connecting Rod Bearings
3500 GENERATOR SET ENGINES Front Balancer Group (3508)
3500 GENERATOR SET ENGINES Rear Gear Group
3500 GENERATOR SET ENGINES Crankshaft Main Bearings
3500 GENERATOR SET ENGINES Pistons And Connecting Rod Assemblies
3500 GENERATOR SET ENGINES Cylinder Liners
3500 GENERATOR SET ENGINES Camshafts
3500 GENERATOR SET ENGINES Camshaft Bearings
3500 GENERATOR SET ENGINES Crankshaft
CONTROL PANEL SR4 GENERATOR MOUNTED Identification