Engine Oil Pan - Remove - C175-16
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7505 | 变速箱千斤顶 | 2 |
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 将机油排放到适当的容器中。 有关正确的排放和加注步骤，参考操作和保养手册, "发动机机油和滤清器 - 更换"。
- 拆卸管 (3) 。 拆下支架 (1) 和 (2) 。
Show/hide table
| 图 1 | g03678026 |
- 断开线束组件 (4) 。
Show/hide table
 | |
| 图 2 | g03678028 |
- 拆下管组件 (5) 和 O 形密封圈。
Show/hide table
 | |
| 图 3 | g03678031 |
- 拆下交流发电机盖 (6) 。
Show/hide table
 | |
| 图 4 | g03678032 |
- 松开螺栓 (7) 。 螺栓 (7) 可以保持在交流发电机支架中。
Show/hide table
 | |
| 图 5 | g03678033 |
- 松开螺栓 (8) 。 螺栓 (8) 可以保持在滤清器底座上。
Show/hide table
 | |
| 图 6 | g03678034 |
- 拆下螺母 (11) 和 (13) 并在旁边安置支架 (14) 。 拆下螺栓 (12) 并在旁边安置软管 (10) 。 松开螺栓 (11) 。 螺栓 (9) 可以保持在滤清器支架中。
Show/hide table
| 图 7 | g03678036 |
- 使用工具 (A) 和适当的支座支撑发动机油底壳 (16) 。 发动机油底壳 (16) 的重量约为 175 kg (386 lb)。 拆下螺栓 (15) 并缓慢降下发动机油底壳 (16) 。
Show/hide table
| 图 8 | g03679151 |
Caterpillar Information System:
777D and 777E Off-Highway Truck Air System and Brakes Temperature Sensor (Torque Converter Oil)
14M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Self-Diagnostics
16M Motor Grader Engine Supplement Engine Oil Filter Base - Assemble
16M Motor Grader Engine Supplement Engine Oil Filter Base - Disassemble
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Manifold and Solenoid (Work Tool Positioner) - If Equipped
777G Off-Highway Truck Power Train Spindle (Rear) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Water and Emulsion Lines
777G Off-Highway Truck Power Train Spindle (Rear) - Remove
D6K Track-Type Tractor Hydraulic System Cat Data Link
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Assemble
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Disassemble
14M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
C11 and C13 Engines Fan Drive
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1933 - FMI 04
C13 and C15 On-highway Engines Coolant Contains Oil
735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166} 735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166}
777E, 777F and 777G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
2006/11/20 Software for Track Feller Bunchers Has Been Updated {1408, 7490, 7620}
14M Motor Grader Engine Supplement Refrigerant Compressor - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2211 - FMI 03
3126B Engine for Caterpillar Built Machines Analog Sensor Supply Circuit - Test
777G Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
C15 and C18 Petrolem Generator Set Engines Oil Contains Fuel