Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 185-3630     | 带式扳手组件     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 为便于安装,在所有管路、软管、导线及管上做出识别标记。 堵上所有管路、软管和管。 这将有助于防止液体泄漏和防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 断开软管组件 (1) 。
Show/hide table
图 1 | g01325735 |
- 断开线束组件 (2) 。 断开线束组件 (3) 。 断开软管组件 (4) 。
Show/hide table
图 2 | g01325737 |
- 使用工具 (A) 拆下燃油滤清器 (5) 。
Show/hide table
图 3 | g01325869 |
- 拆下螺栓 (6) ,然后拆下燃油滤清器底座 (7) 。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装燃油滤清器底座 (7) ,然后安装螺栓 (6) 。
Show/hide table
图 4 | g01325869 |
- 安装燃油滤清器 (5) 。
- 连接软管组件 (4) 。 连接线束组件 (3) 。 连接线束组件 (2) 。
Show/hide table
图 5 | g01325737 |
- 连接软管组件 (1) 。
Show/hide table
图 6 | g01325735 |
Caterpillar Information System:
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Self-Diagnostics
16M Motor Grader Engine Supplement Engine Oil Filter Base - Assemble
16M Motor Grader Engine Supplement Engine Oil Filter Base - Disassemble
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Manifold and Solenoid (Work Tool Positioner) - If Equipped
777G Off-Highway Truck Power Train Spindle (Rear) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Water and Emulsion Lines
777G Off-Highway Truck Power Train Spindle (Rear) - Remove
D6K Track-Type Tractor Hydraulic System Cat Data Link
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Assemble
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Screen - Remove and Install
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190} Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
777D and 777E Off-Highway Truck Air System and Brakes Temperature Sensor (Torque Converter Oil)
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Remove - C175-16
14M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
C11 and C13 Engines Fan Drive
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1933 - FMI 04
C13 and C15 On-highway Engines Coolant Contains Oil
735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166} 735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166}
777E, 777F and 777G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
2006/11/20 Software for Track Feller Bunchers Has Been Updated {1408, 7490, 7620}
14M Motor Grader Engine Supplement Refrigerant Compressor - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2211 - FMI 03
3126B Engine for Caterpillar Built Machines Analog Sensor Supply Circuit - Test