Engine Oil Filter Base - Disassemble
拆解步骤
开始:
- 拆卸发动机机油滤清器底座。 请参考拆解与组装, "发动机机油滤清器底座 - 拆卸"。
- 从机油滤清器底座 (9) 上拆下螺塞 (1) 、O 形密封圈 (2) 、弹簧 (3) 和柱塞 (4) 。
Show/hide table
 | |
| 图 1 | g01325673 |
Show/hide table
 |
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 从机油滤清器底座 (9) 上拆下螺塞 (5) 、O 形密封圈 (6) 、弹簧 (7) 和柱塞 (8) 。
- 从机油滤清器底座 (9) 上拆下螺塞 (10) 、O 形密封圈 (11) 、弹簧 (12) 和阀 (13) 。
Show/hide table
 | |
| 图 2 | g01325679 |
Show/hide table
|
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 从机油滤清器底座 (9) 上拆下螺栓 (14) 、阀座 (15) 、弹簧 (16) 、间隔套 (17) 和挡圈 (18) 。
Show/hide table
 | |
| 图 3 | g01325682 |
Show/hide table
|
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 从机油滤清器底座 (9) 上拆下防尘盖 (19) 、测试端口 (20) 和 O 形密封圈 (21) 。
Show/hide table
 | |
| 图 4 | g01325684 |
- 如有必要，拆下双头螺栓 (22) 。
Show/hide table
 | |
| 图 5 | g01325685 |
- 拆下螺塞 (23) 和 O 形密封圈 (24) 。
Show/hide table
 | |
| 图 6 | g01325687 |
Caterpillar Information System:
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Manifold and Solenoid (Work Tool Positioner) - If Equipped
777G Off-Highway Truck Power Train Spindle (Rear) - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Water and Emulsion Lines
777G Off-Highway Truck Power Train Spindle (Rear) - Remove
D6K Track-Type Tractor Hydraulic System Cat Data Link
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Assemble
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Screen - Remove and Install
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190} Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Torque Converter - Assemble
C175-16 Locomotive Engine Restriction of Air Inlet and Exhaust
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Gear Motor (Fan, Demand)
16M Motor Grader Engine Supplement Engine Oil Filter Base - Assemble
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Self-Diagnostics
14M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
777D and 777E Off-Highway Truck Air System and Brakes Temperature Sensor (Torque Converter Oil)
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Remove - C175-16
14M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
C11 and C13 Engines Fan Drive
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1933 - FMI 04
C13 and C15 On-highway Engines Coolant Contains Oil
735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166} 735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166}
777E, 777F and 777G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
2006/11/20 Software for Track Feller Bunchers Has Been Updated {1408, 7490, 7620}