Spindle (Rear) - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-9200 | Lever Puller Hoist | 1 |
| 138-7574 | Link Bracket | 2 | |
| 140-7742 | Sleeve | 2 | |
| C | 155-0695 | Thread Lock Compound | 1 |
- Install housing (15). Install ring (14).
- Install plate (13). Apply Tooling (C) onto bolts (12). Install bolts (12).
Show/hide table
Illustration 2 g01325638 - Install sensor (11).
Show/hide table
Illustration 3 g01325634 - Apply lubricant onto O-ring seal (10). Install O-Ring seal (10).
Show/hide table
Illustration 4 g01325628 - Attach Tooling (A) and a suitable lifting device onto spindle (8). The weight of spindle (8) is approximately
590 kg (1300 lb) . - Install spindle (8).
- Install bolts (9). Tighten bolts (9) to a torque of
900 ± 100 N·m (664 ± 74 lb ft) .Show/hide table
Illustration 5 g01325613 Show/hide table
Illustration 6 g01325608 - Position tube assemblies (5) and (3). Connect tube assemblies (5) and (3). Install bolts (4), (6), and (7).
Show/hide table
Illustration 7 g01325602 - Install harness assembly (1) onto clip (2). Connect harness assembly (1).
Show/hide table
| |
| Illustration 1 | g01325641 |
End By:
- Install the rear brake. Refer to Disassembly and Assembly, "Service and Parking Brake - Install".
Caterpillar Information System:
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Water and Emulsion Lines
777G Off-Highway Truck Power Train Spindle (Rear) - Remove
D6K Track-Type Tractor Hydraulic System Cat Data Link
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Assemble
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Piston Pump (Hydrostatic) - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Screen - Remove and Install
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190} Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Torque Converter - Assemble
C175-16 Locomotive Engine Restriction of Air Inlet and Exhaust
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Gear Motor (Fan, Demand)
Bench Test Procedure for a 777Fand 777GOff-Highway Truck Torque Converter {3101} Bench Test Procedure for a 777Fand 777GOff-Highway Truck Torque Converter {3101}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Replacing the ECM
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Manifold and Solenoid (Work Tool Positioner) - If Equipped
16M Motor Grader Engine Supplement Engine Oil Filter Base - Disassemble
16M Motor Grader Engine Supplement Engine Oil Filter Base - Assemble
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Self-Diagnostics
14M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
777D and 777E Off-Highway Truck Air System and Brakes Temperature Sensor (Torque Converter Oil)
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Remove - C175-16
14M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
C11 and C13 Engines Fan Drive
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1933 - FMI 04
C13 and C15 On-highway Engines Coolant Contains Oil
735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166} 735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166}