Front Frame and Rear Frame - Separate
Separation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-9200     | Lever Puller Hoist     | 1     |
B     | 138-7575     | Link Bracket     | 1     |
C     | 138-7574     | Link Bracket     | 2     |
Start By:
- Remove the piston pump (propel). Refer to Disassembly and Assembly, "Piston Pump (Propel) - Remove".
- Remove bolts and cover (1) from the console.
Show/hide table
Illustration 1 | g01085190 |
- Disconnect harness assemblies (2) and (3). Remove the cable straps.
Show/hide table
Illustration 2 | g01085205 |
- Remove rear enclosure (4) .
Show/hide table
Illustration 3 | g01317073 |
- Disconnect harness assembly (5) and remove the cable straps.
Show/hide table
Illustration 4 | g01084667 |
- Disconnect harness assembly (6) and remove the cable straps.
Show/hide table
Illustration 5 | g01084668 |
- Remove screws (7) and cover (8) for the left lamp assembly.
Show/hide table
Illustration 6 | g01084674 |
- Disconnect harness assemblies (11). Remove screws (10) and lamp assembly (9) .
Show/hide table
Illustration 7 | g01084705 |
- Repeat Steps 6 and 7 for the right lamp assembly.
- Remove nut (13) and remove headlight (14) from the machine. Disconnect harness assemblies (12) .
Show/hide table
Illustration 8 | g01084741 |
- Remove clamp (15) .
Show/hide table
Illustration 9 | g01084812 |
- Disconnect harness assemblies (17) and (18). Remove the cable straps from harness assembly (16), (17), and (18) .
- Remove harness assembly from the rear frame of the machine.
- Disconnect hose assemblies (19) .
Show/hide table
Illustration 10 | g01317099 |
- Disconnect hose assembly (20). Remove the clamp from the hose assembly.
Show/hide table
Illustration 11 | g01317107 |
- Disconnect hose assemblies (21) .
Show/hide table
Illustration 12 | g01317110 |
- Remove bolt (22) and pin assembly (23) from steering cylinder (24) .
Show/hide table
Illustration 13 | g01317215 |
- Attach Tooling (A), Tooling (B), Tooling (C), and a suitable lifting device to the machine.
Show/hide table
Illustration 14 | g01317204 |
- Raise the machine and install suitable blocking under the front frame of the machine.
- Remove bolts (25) from the articulation and oscillating hitch (26) .
Show/hide table
Illustration 15 | g01317214 |
- Separate the front and the rear frame. Install suitable wood blocks under the rear frame of the machine. Lower the machine.
Caterpillar Information System:
2015/02/12 New Recommendations for Tire Size Differences {4203}
CP-433E, CS-423E and CS-433E Paving Compactors Safety Messages
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders Blade Wear
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders Blade Reaction Time - Adjust - Valve Speed
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders Beeper
770 and 772 Off-Highway Truck Power Train Rear Axle Housing
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Vibratory Control
CB34 and CC34 Paving Compactors Machine Systems Diaphragm Pump (Additive Spray) - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Striker Bar - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Striker Bar - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Cleaner Bar - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Cleaner Bar - Remove
777G Off-Highway Truck Machine Systems Wheel Chock (Front and Rear) - Remove and Install
CB34 and CC34 Paving Compactors Machine Systems Front Frame and Rear Frame - Connect
770 and 772 Off-Highway Truck Hydraulic and Braking System Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust
Operation of Product Link{7606} Operation of Product Link{7606}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Location of Electrical Components
AccuGrade® GPS v11 for CD700 Brightness (Display and Light Bar)
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders Controls
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders Customer Supplied Radio
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System General Information
AccuGrade® GPS v11 for CD700 Data Card
414E, 416E, 420E and 430E Backhoe Loaders MID 053 - CID 2652 - FMI 06
777F Off-Highway Truck Machine Systems Piston Pump (Steering) - Remove