Air Cleaner - Remove and Install
Removal Procedure
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Open the engine enclosure.
- Loosen clamp (3) and remove tube (2) from air cleaner housing (1) .
Show/hide table
Illustration 1 | g01305436 |
- Disconnect tube assembly (4) from the air cleaner housing.
- Remove cover (5) from air cleaner housing (1) .
Show/hide table
Illustration 2 | g01305438 |
- Remove primary air filter element (6) from air cleaner housing (1) .
Show/hide table
Illustration 3 | g01305441 |
- Remove secondary air filter element (7) from air cleaner housing (1) .
Show/hide table
Illustration 4 | g01305442 |
- Remove bolts (8) and remove the air cleaner housing from the engine.
Installation Procedure
- Install air cleaner housing (1) and bolts (8) .
Show/hide table
Illustration 5 | g01305442 |
- Install secondary air filter element (7) into the air cleaner housing.
- Install primary air filter element (6) into air cleaner housing (1) .
Show/hide table
Illustration 6 | g01305441 |
- Install cover (5) to air cleaner housing (1) .
Show/hide table
Illustration 7 | g01305438 |
- Connect tube assembly (4) to air cleaner housing (1) .
Show/hide table
Illustration 8 | g01305436 |
- Install tube (2) and tighten clamp (3) to air cleaner housing (1) .
- Close the engine enclosure.
Caterpillar Information System:
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Transmission Pressures - Test and Adjust
450E Backhoe Loader Axles, Differential and Brakes Wheel and Tire (Rear) Wheel and Tire (Rear)
2007/04/23 A New Hystat Pump Improves Reliability {3203, 5070}
777E, 777F and 777G Off-Highway Truck Muffler - Remove and Install
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Inlet Air Is Restricted
777E, 777F and 777G Off-Highway Truck Magnetic Switch (Prelubrication Relay) - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Position Sensor (Left Brake Pedal) (Decelerator)
C175-16 and C175-20 Engines for Off-Highway Trucks Cylinder Block - Type 1
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Control Manifold (Steering Backup) - Test
AS3251C Asphalt Paver Vibratory Group - Install
AS3301C Asphalt Screed Vibratory Group - Assemble
AS3301C Asphalt Screed Vibratory Group - Disassemble
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1960 - FMI 09
2006/11/27 A New Base Standoff is Now Available for Reclaimer Mixers {6636, 6637}
AS3251C Asphalt Paver Power Adjuster Motor Group (Crown) - Remove
AS3251C Asphalt Paver Power Adjuster Motor Group (Crown) - Install
AS3251C Asphalt Paver Power Adjuster Motor Group (Extender Height) - Remove
793D Off-Highway Truck/Tractor Center Arm (Steering) - Remove and Install
AS3251C Asphalt Paver Power Adjuster Motor Group (Extender Height) - Install
Bench Test Procedure for Hydraulic Piston Pumps {4306, 5070, 5084} Bench Test Procedure for Hydraulic Piston Pumps {4306, 5070, 5084}
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1961 - FMI 03
AS3251C Asphalt Paver Power Adjuster Motor Group (Sloper) - Remove
AS3251C Asphalt Paver Power Adjuster Motor Group (Sloper) - Install