Temperature Switch
Show/hide table
 | |
| Illustration 1 | g01276141 |
(1) Nut
- Torque ... 40 ± 5 N·m (30 ± 4 lb ft)
(2) Screws
- Torque for the screws ... 1.0 ± 0.2 N·m (9 ± 2 lb in)
Operating temperature range ... −40 to 150 °C (−40 to 302 °F)
Actuation temperature ... 87.8° ± 2.8 °C (190° ± 5 °F)
Deactuation temperature from the open position to the closed position ... 79 °C (174 °F)
Contact position ... Normally closed below deactuation temperature
Caterpillar Information System:
Starting and Charging Systems Key Breaker Test Description
Starting and Charging Systems Alternator Breaker Test Description
3508 EUI Engine for Off-Highway Truck/Tractors Magnetic Switch
3508 EUI Engine for Off-Highway Truck/Tractors Engine Speed Sensor
Starting and Charging Systems Batteries Test Description
3512C Engine for 785D Off-Highway Truck/Tractors Camshaft
Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057} Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057}
3176C Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Inlet Pressure Sensor
2006/06/19 Check the Alignment on the Alternator {1425}
Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077} Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077}
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Outlet Pressure Sensor
2006/06/05 An Optional Cover for the Sight Gauges On the Torque Converter Group Is Available {3101}
Starting and Charging Systems Key Start Switch Test Description
How to Avoid Timestamp Problems with VIMS Advisor{7601} How to Avoid Timestamp Problems with VIMS Advisor{7601}
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Remove
572R Series II Pipelayer Fast Fill Fuel Adapter
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Install
572R Series II Pipelayer Fast Fill Fuel Adapter
Procedure to Fill Gear Pump with Oil Before Start-Up{5073} Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0713 - FMI 04
R1700G Load Haul Dump Power Train Differential and Bevel Gear (NoSPIN)
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 2683 - FMI 03
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 2683 - FMI 04