R1700G Load Haul Dump Power Train Caterpillar


Differential and Bevel Gear (NoSPIN)

Usage:

R1700G SBR



Illustration 1g01276240

Note: Bolts (1) cannot be reused. Always install new bolts.

(1) Tighten the 20 bolts to a torque of 230 ± 40 N·m (170 ± 30 lb ft) and then turn an additional 120° ± 10°.

Note: Bolts (2) cannot be reused. Always install new bolts.

(2) Apply Loctite 7649 Primer and then apply Loctite 620 Retaining Compound to the threads of the bolts prior to assembly. Tighten the 24 bolts to a torque of 130 ± 10 N·m (95 ± 8 lb ft) and then turn an additional 120° ± 10°.

Note: Bolts (3) cannot be reused. Always install new bolts.

(3) Tighten the 16 bolts to a torque of 105 ± 20 N·m (77 ± 15 lb ft) and then turn an additional 120° ± 10°.

(4) Torque for two bolts ... 1800 ± 200 N·m (1330 ± 150 lb ft)

(5) Torque for the two bolts ... 900 ± 100 N·m (660 ± 75 lb ft)

Caterpillar Information System:

773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0713 - FMI 04
Procedure to Fill Gear Pump with Oil Before Start-Up{5073} Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
572R Series II Pipelayer Fast Fill Fuel Adapter
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Install
572R Series II Pipelayer Fast Fill Fuel Adapter
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Remove
How to Avoid Timestamp Problems with VIMS Advisor{7601} How to Avoid Timestamp Problems with VIMS Advisor{7601}
Starting and Charging Systems Key Start Switch Test Description
2006/06/05 An Optional Cover for the Sight Gauges On the Torque Converter Group Is Available {3101}
3508 EUI Engine for Off-Highway Truck/Tractors Temperature Switch
Starting and Charging Systems Key Breaker Test Description
Starting and Charging Systems Alternator Breaker Test Description
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 2683 - FMI 03
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 2683 - FMI 04
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 2683 - FMI 08
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 1326 - FMI 02
R1700G Load Haul Dump Power Train NoSPIN Differential
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Light Bar - Configure
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Machine Dimensions - Configure
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Machine Type - Configure - Machine Settings
793D Off-Highway Truck Power Train Drive Shaft (Main) - Remove and Install
583T Pipelayer Machine Systems Fast Fill Fuel Adapter
3176C Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
583T Pipelayer Machine Systems Fast Fill Fuel Adapter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.