3512C Engine for 785D Off-Highway Truck/Tractors Caterpillar


Camshaft

Usage:

3512C B7F


图 1g02582277
典型示例

表 1
技术规格 - 273-5712 凸轮轴总成、 273-5713 凸轮轴总成和 308-5361 凸轮轴总成 
项目  数量  零件  技术规格说明 
新凸轮轴上止推垫圈组件的槽尺寸为 8.75 ± 0.05 mm (0.344 ± 0.002 inch)。 
4N-1650 定位销  凸轮轴间定位销的延伸长度为 22.0 ± 0.5 mm (0.87 ± 0.02 inch)。 
5B-5821 定位销  定位销从凸轮轴组件延伸的长度为 12.0 ± 0.5 mm (0.47 ± 0.02 inch)。 
128-5993 止推垫圈  新止推垫圈的厚度为 8.40 ± 0.05 mm (0.331 ± 0.002 inch)。 
轴承轴颈的直径为 91.88 ± 0.02 mm (3.617 ± 0.001 inch)
安装后凸轮轴轴承的孔径为 92.00 ± 0.08 mm (3.622 ± 0.003 inch)。 
新凸轮轴组件的端隙为 0.15 to 0.35 mm (0.006 to 0.014 inch)。 
16  5P-0076 螺栓  拧紧至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。 


图 2g02582338

表 2
技术规格 - 273-5712 凸轮轴总成、 273-5713 凸轮轴总成和 308-5361 凸轮轴总成 
项目  数量  零件  技术规格说明 
使用以下步骤确定实际凸轮轴凸轮升程:
1. 测量凸轮轴凸轮高度 (H)。
2. 测量基圆 (J)。
3. 从凸轮轴凸轮高度值 (H) 中减去基圆 (J)。 二者之差就是实际凸轮轴凸角升程。 
规定的凸轮轴凸轮升程
进气凸轮为 12.73 mm (0.501 inch)
喷油器凸轮为 13.8065 mm (0.54356 inch)
排气凸轮为 13.1 mm (0.52 inch)。 

Caterpillar Information System:

Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057} Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057}
3176C Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Inlet Pressure Sensor
2006/06/19 Check the Alignment on the Alternator {1425}
Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077} Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077}
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Outlet Pressure Sensor
3176C Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Engine Oil Pressure Sensor
Starting and Charging Systems Starter Ground Circuit Test Description
2006/10/23 An Improved Torque Converter Turbine is Now Used In the Torque Converter Group {3101}
990K Wheel Loader Electronic Unit Injector - Inspect/Adjust
2006/06/05 New Exhaust Temperature Sensors Are Now Used {1919}
Starting and Charging Systems Batteries Test Description
3508 EUI Engine for Off-Highway Truck/Tractors Engine Speed Sensor
3508 EUI Engine for Off-Highway Truck/Tractors Magnetic Switch
Starting and Charging Systems Alternator Breaker Test Description
Starting and Charging Systems Key Breaker Test Description
3508 EUI Engine for Off-Highway Truck/Tractors Temperature Switch
2006/06/05 An Optional Cover for the Sight Gauges On the Torque Converter Group Is Available {3101}
Starting and Charging Systems Key Start Switch Test Description
How to Avoid Timestamp Problems with VIMS Advisor{7601} How to Avoid Timestamp Problems with VIMS Advisor{7601}
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Remove
572R Series II Pipelayer Fast Fill Fuel Adapter
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.