Muffler
Show/hide table
 | |
| 图 1 | g01237630 |
(1) 消声器卡箍的扭矩 ... 68 ± 12 N·m (50 ± 9 lb ft)
注: 卡箍上的开口绝对不能与管上的槽对齐。
(2) 卡箍的扭矩 ... 8.5 N·m (75 lb in)
(3) 组装之前，用 4C-5599 防粘结剂 润滑螺纹和垫圈。
Caterpillar Information System:
24M Motor Grader Machine Systems Blade Mounting
587T Pipelayer Power Train Transmission
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000} REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C15 and C18 Generator Set Engines Turbocharger - Assemble
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
24M Motor Grader Machine Systems Drawbar
C15 and C18 Generator Set Engines Turbocharger - Disassemble
587T Pipelayer Power Train Main Relief Valve
24M Motor Grader Machine Systems Articulation Cylinder Mounting
2006/02/06 An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555}
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
24M Motor Grader Machine Systems Ripper
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
587R Pipelayer Power Train Transmission
140H and 160H Motor Graders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
24M Motor Grader Machine Systems Ripper Cylinder Mounting
2006/03/20 Three Tools Are Available for Servicing Drift Reduction Valves {0700, 0738, 5051, 5143}
2006/02/13 FT-3022 Support Plate Properly Positions Lifting Device Under the Counterweight {0635, 7056}
2006/02/13 Bore Gauge Measures Spool Bores in Valve {0738, 0763, 5050, 5051}
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble