REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
- Multi Terrain Loader: All
- Skid Steer Loader: All
- Work Tool:
- Skid Steer Loader: All
- A13 (S/N:: ACY1-UP)
- A14B (S/N:: MRS1-UP)
- A19 (S/N:: ADA1-UP)
- A19B (S/N:: SMR1-UP)
- A26 (S/N:: AKF1-UP)
- A26B (S/N:: LLS1-UP)
- A7 (S/N:: 7BZ1-UP)
- A7B (S/N:: JMT1-UP)
- BA18 (S/N:: ACE1-UP; AZN1-UP)
- BH27 (S/N:: B2H1-UP)
- BH30 (S/N:: B3H1-UP)
- BH30 W (S/N:: B3W1-UP)
- BP15 (S/N:: ACT1-UP)
- BP15B (S/N:: MPB1-UP)
- BP18 (S/N:: ADH1-UP)
- CV16 (S/N:: ACH1-UP)
- CV18 (S/N:: AAM1-UP)
- CV18B (S/N:: RCA1-UP)
- LR15 (S/N:: ADF1-UP)
- LR15B (S/N:: EFS1-UP)
- LR18 (S/N:: ADP1-UP)
- LR18B (S/N:: DAS1-UP)
- LT13 (S/N:: AAS1-UP)
- LT13B (S/N:: CHZ1-UP)
- LT18 (S/N:: ABZ1-UP)
- LT18B (S/N:: LDA1-UP)
- PC203 (S/N:: PCB1-UP)
- PC204 (S/N:: RDG1-UP)
- PC205 (S/N:: RBG1-UP)
- PC206 (S/N:: DDG1-UP)
- PC210 (S/N:: GDR1-UP)
- PC3 (S/N:: ABW1-UP)
- PC4 (S/N:: ACC1-UP)
- PC6 (S/N:: AKS1-UP)
- PC9 (S/N:: ALC1-UP)
- SG16 (S/N:: ALJ1-UP)
- SG16B (S/N:: MAP1-UP)
- SG18 (S/N:: AMG1-UP)
- SG18B (S/N:: SGL1-UP)
- SR17 (S/N:: SBA1-UP)
- SR18 (S/N:: SBB1-UP)
- SR21 (S/N:: SBC1-UP)
- SW45 (S/N:: WWS1-UP)
- SW60 (S/N:: WLS1-UP)
- T15 (S/N:: ABL1-UP)
- T15B (S/N:: SLW1-UP)
- T9 (S/N:: ABC1-UP)
- T9B (S/N:: JAJ1-UP)
- A14B (S/N:: MRS1-UP)
Introduction
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS
Problem
Dealerships have requested a reference chart in order to help identify hydraulic quick disconnects on work tools. Dealerships have requested a reference chart in order to help identify hydraulic quick disconnects on work tools.
Solution
Use the following chart as a reference for replacing the quick disconnects. Refer to the chart that is shown below.
Note: All references are related to the machine. Tools "A series" are ready to be used on "A series" machines. Tools "B series" are ready to be used on "B series" machines. There is no reference to any specific Model of Work Tool.
Show/hide table
Hyd Circuit     | Pt. No.     | Coupler (Size)     | Coupler (Type)     | Thd (Form)     | Male, Female     | Thd (Size)     | Max Operating Pressure MPa     |
Flow L/Min     |
---|---|---|---|---|---|---|---|---|
Machine "A Series", Connect Under Pressure (No)     | ||||||||
Case Drain     | 153-2996     | 10     | Male     | STOR     | Female     | (3/4-16)     | (35)     | (85)     |
Std Flow     | 193-8334     | (12.5)     | Male     | ORFS     | Male (B/H)     | (1-14)     | (35)     | (135)     |
Std Flow     | 193-8335     | (12.5)     | Female     | ORFS     | Male (B/H)     | (1-14)     | (35)     | (135)     |
Machine "A Series", Tool "A Series", Connect Under Pressure (No)     | ||||||||
High Flow     | 187-3226     | (3/4)     | Male     | STOR     | Female     | (1-1/16-12)     | (25)     | (160)     |
High Flow     | 187-3225     | (3/4)     | Female     | STOR     | Female     | (1-1/16-12)     | (25)     | (125)     |
Machine "B Series", Connect Under Pressure (No)     | ||||||||
Aux Circuit     | 229-5468     | (6.3)     | Male     | ORFS     | Male (B/H)     | (11/16-16)     | (25)     | (20)     |
Aux Circuit     | 229-5471     | (6.3)     | Female     | ORFS     | Male (B/H)     | (11/16-16)     | (25)     | (20)     |
Case Drain     | 229-5473     | (10)     | Male     | ORFS     | Male (B/H)     | (13/16-16)     | (25)     | (38)     |
High Flow     | 218-5844     | (16)     | Male     | STOR     | Male     | (7/8-14)     | (25)     | (110)     |
High Flow     | 218-5846     | (16)     | Female     | STOR     | Male     | (7/8-14)     | (25)     | (90)     |
Std Flow     | 218-5843     | (12.5)     | Male     | STOR     | Male     | (3/4-16)     | (25)     | (100)     |
Std Flow     | 218-5845     | (12.5)     | Female     | STOR     | Male     | (3/4-16)     | (25)     | (78)     |
MP Buckets, Connect Under Pressure (Yes)     | ||||||||
Std Flow     | 185-7887     | (12.5)     | Male     | STOR     | Female     | (7/8-14)     | (35)     | (100)     |
Tool "A Series", Connect Under Pressure (No)     | ||||||||
Std Flow     | 153-2994     | (12.5)     | Female     | STOR     | Female     | (7/8-14)     | (35)     | (135)     |
Std Flow     | 153-2995     | (12.5)     | Male     | STOR     | Female     | (7/8-14)     | (35)     | (135)     |
Tool "A Series", Tool "B Series", Connect Under Pressure (No)     | ||||||||
Case Drain     | 153-2997     | (10)     | Female     | STOR     | Female     | (3/4-16)     | (35)     | (85)     |
Tool "B Series", Connect Under Pressure (No)     | ||||||||
Aux Circuit     | 152-8181     | (6.3)     | Male     | STOR     | Female     | (9/16-18)     | (40)     | (36)     |
Aux Circuit     | 204-5098     | (6.3)     | Female     | STOR     | Female     | (9/16-18)     | (40)     | (36)     |
High Flow     | 142-8948     | (16)     | Male     | STOR     | Female     | (1-1/16-12)     | (35)     | (235)     |
High Flow     | 142-8949     | (16)     | Female     | STOR     | Female     | (1-1/16-12)     | (35)     | (235)     |
Caterpillar Information System:
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C15 and C18 Generator Set Engines Turbocharger - Assemble
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
24M Motor Grader Machine Systems Drawbar
C15 and C18 Generator Set Engines Turbocharger - Disassemble
587T Pipelayer Power Train Main Relief Valve
24M Motor Grader Machine Systems Articulation Cylinder Mounting
2006/02/06 An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
587T Pipelayer Power Train Transmission
24M Motor Grader Machine Systems Blade Mounting
24M Motor Grader Machine Systems Muffler
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
24M Motor Grader Machine Systems Ripper
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
587R Pipelayer Power Train Transmission
140H and 160H Motor Graders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
24M Motor Grader Machine Systems Ripper Cylinder Mounting
2006/03/20 Three Tools Are Available for Servicing Drift Reduction Valves {0700, 0738, 5051, 5143}