Transmission
Show/hide table
Illustration 1 | g03405221 |
Show/hide table
Specification for 105-2488 Transmission Planetary Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 8M-4432 O-Ring Seal     | Before assembly, lubricate the bore lightly with lubricant that is being sealed.     |
2     | Thickness of five new friction discs and four new plates is 47.95 ± 0.72 mm (1.888 ± 0.028 inch):     | ||
5 | 9P-7390 Friction Disc     | Thickness of one new friction disc is 5.59 ± 0.08 mm (0.220 ± 0.003 inch).     |
|
4 | 6I-8500 Plate     | Thickness of one new plate is 5.00 ± 0.08 mm (0.197 ± 0.003 inch).     |
|
3     | Thickness of five new friction discs and four new plates is 47.95 ± 0.72 mm (1.888 ± 0.028 inch):     |
||
5 | 9P-7390 Friction Disc     | Thickness of one new friction disc is 5.59 ± 0.08 mm (0.220 ± 0.003 inch).     |
|
4 | 6I-8500 Plate     | Thickness of one new plate is 5.00 ± 0.08 mm (0.197 ± 0.003 inch).     |
|
4     | Thickness of three new friction discs and two new plates is 26.77 ± 0.46 mm (1.054 ± 0.018 inch):     |
||
3 | 328-4374 Friction Disc     | Thickness of one new friction disc is 5.59 ± 0.10 mm (0.220 ± 0.004 inch).     |
|
2 | 6I-8500 Plate     | Thickness of one new plate is 5.00 ± 0.08 mm (0.197 ± 0.003 inch).     |
|
5     | 1     | 8M-5266 O-Ring Seal     | Before assembly, lubricate the bore lightly with lubricant that is being sealed.     |
6     | Thickness of two new friction discs and one new plate is 16.18 ± 0.28 mm (0.637 ± 0.011 inch):     |
||
2 | 328-4374 Friction Disc     | Thickness of one new friction disc is 5.59 ± 0.10 mm (0.220 ± 0.004 inch).     |
|
1 | 6I-8500 Plate     | Thickness of one new plate is 5.00 ± 0.08 mm (0.197 ± 0.003 inch).     |
|
7     | Thickness of four new friction discs and three new plates is 31.80 ± 0.64 mm (1.252 ± 0.025 inch):     |
||
4 | 328-4375 Friction Disc     | Thickness of one new friction disc is 4.95 ± 0.10 mm (0.195 ± 0.004 inch).     |
|
3 | 8P-1964 Plate     | Thickness of one new plate is 4.00 ± 0.08 mm (0.157 ± 0.003 inch).     |
|
8     | 2     | 8M-5010 O-Ring Seal     | Before assembly, lubricate the bore lightly with lubricant that is being sealed.     |
9     | 1     | 8M-5255 O-Ring Seal     | Before assembly of each bearing, lubricate the groove and O-ring seal with oil immediately.     |
10     | 2     | 5M-3038 O-Ring Seal     | Before assembly of each bearing, lubricate the groove and O-ring seal with oil immediately.     |
11     | 2     | 1M-8657 Bolt     | Torque to 115 ± 7 N·m (85 ± 5 lb ft).     |
12     | 10     | 7H-7658 Spring     | Length under test force is 105.570 mm (4.1563 inch). Test force is 186.83 ± 14.46 N (42.00 ± 3.25 lb). Free length after test is 140.495 mm (5.5313 inch).     |
A     | 4     | 7T-6581 Planetary Shaft     | Diameter is 33.523 ± 0.006 mm (1.3198 ± 0.0002 inch).     |
B     | 4     | 7T-6578 Planetary Gear     | Before assembly bore diameter is 44.666 ± 0.008 mm (1.7585 ± 0.0003 inch).     |
C     | 10     | 6I-9788 Planetary Gear     | Before assembly bore diameter 43.221 ± 0.010 mm (1.7016 ± 0.0004 inch).     |
D     | 5     | 112-5585 Planetary Shaft     | Diameter is 35.255 ± 0.006 mm (1.3880 ± 0.0002 inch).     |
E     | 4     | 8P-1916 Planetary Gear     | Before assembly bore diameter is 34.399 ± 0.008 mm (1.3543 ± 0.0003 inch).     |
F     | 4     | 9G-0289 Planetary Shaft     | Diameter is 26.439 ± 0.006 mm (1.0409 ± 0.0002 inch).     |
13     | 20     | 4M-9592 Spring     | Length under test force is 34.92 mm (1.375 inch). Test force is 116.5 ± 5.8 N (26.2 ± 1.3 lb). Free length after test is 44.7 mm (1.76 inch).     |
14     | 8     | 4M-2442 Bolt     | Torque to 115 ± 7 N·m (85 ± 5 lb ft).     |
Caterpillar Information System:
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove
24M Motor Grader Machine Systems Ripper
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
24M Motor Grader Machine Systems Muffler
24M Motor Grader Machine Systems Blade Mounting
587T Pipelayer Power Train Transmission
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000} REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C15 and C18 Generator Set Engines Turbocharger - Assemble
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
140H and 160H Motor Graders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Engine Oil Filter Base - Install
24M Motor Grader Machine Systems Ripper Cylinder Mounting
2006/03/20 Three Tools Are Available for Servicing Drift Reduction Valves {0700, 0738, 5051, 5143}
2006/02/13 FT-3022 Support Plate Properly Positions Lifting Device Under the Counterweight {0635, 7056}
2006/02/13 Bore Gauge Measures Spool Bores in Valve {0738, 0763, 5050, 5051}
C15 and C18 Generator Set Engines Engine Oil Filter Base - Disassemble
Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201} Inspection and Repair Procedures for Wheels that are Used on Off-Highway Trucks {4201, 4201, 4201}
C15 and C18 Generator Set Engines Engine Oil Filter Base - Assemble
583T Pipelayer Machine Systems Fuel Tank - Remove and Install
583T Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
583T Pipelayer Machine Systems Hydraulic Tank and Filter - Install