C15 and C18 Generator Set Engines Caterpillar


Turbocharger - Disassemble

Usage:

C15 115

拆卸步骤

开始:

  1. 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01237470

  1. 将软管 (3) 从压缩机壳体 (1) 上断开。

  1. 松开 V 形带箍 (2) 和 (6) 。

  1. 将压缩机壳体 (1) 和涡轮增压器芯 (5) 分离。

  1. 将涡轮壳体 (4) 和涡轮增压器芯 (5) 分离。


注意

请勿尝试拆解涡轮增压器芯组件或废气旁通阀。 请勿拆下压缩机叶轮。 涡轮增压器芯组件和废气旁通阀不能在现场进行维护,应作为整体进行更换。


Caterpillar Information System:

587T Pipelayer Power Train Main Relief Valve
24M Motor Grader Machine Systems Articulation Cylinder Mounting
2006/02/06 An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
Oil Pan and Gasket{1302, 1302} Oil Pan and Gasket{1302, 1302}
R1300G Series II Load Haul Dump Machine Electrical System Glow Plug
R1300G Series II Load Haul Dump Machine Systems Seat - Install
R1300G Series II Load Haul Dump Machine Systems Seat - Remove
24M Motor Grader Machine Systems Drawbar
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Turbocharger - Assemble
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000} REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
587T Pipelayer Power Train Transmission
24M Motor Grader Machine Systems Blade Mounting
24M Motor Grader Machine Systems Muffler
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
24M Motor Grader Machine Systems Ripper
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.