Drawbar
Show/hide table
 | |
| 图 1 | g01237466 |
Show/hide table
 | |
| 图 2 | g01355276 |
截面 A-A | |
(1) 16 个锁紧螺母的扭矩 ... 500 ± 65 N·m (370 ± 48 lb ft)
(2) 一个 6G-4524 耐磨带 的厚度 ... 5.7 ± 0.4 mm (0.22 ± 0.016 in)
(3) 一个 117-2244 耐磨带 的厚度 ... 10 mm (0.40 in)
(4) 24 个螺栓的扭矩 ... 1000 ± 100 N·m (740 ± 75 lb ft)
Show/hide table
 | |
| 图 3 | g01237531 |
截面 B-B | |
Show/hide table
 | |
| 图 4 | g01355285 |
截面 C-C | |
(5) 八个螺栓的扭矩 ... 1800 ± 200 N·m (1320 ± 150 lb ft)
注: 按照交叉顺序拧紧螺栓。 拧紧转盘中的所有螺栓后，重复按此顺序再拧紧一次。
(6) 117-2242 垫片组
- 1 个垫片组的厚度 ... 6.070 ± 0.325 mm (0.2390 ± 0.0128 in)
Show/hide table
 | |
| 图 5 | g01355286 |
截面 D-D | |
(8) 八个螺栓的扭矩 ... 900 ± 100 N·m (660 ± 75 lb ft)
注: 按照交叉顺序拧紧螺栓。 拧紧转盘中的所有螺栓后，重复按此顺序再拧紧一次。
Caterpillar Information System:
C15 and C18 Generator Set Engines Turbocharger - Disassemble
587T Pipelayer Power Train Main Relief Valve
24M Motor Grader Machine Systems Articulation Cylinder Mounting
2006/02/06 An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
Oil Pan and Gasket{1302, 1302} Oil Pan and Gasket{1302, 1302}
R1300G Series II Load Haul Dump Machine Electrical System Glow Plug
R1300G Series II Load Haul Dump Machine Systems Seat - Install
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Turbocharger - Assemble
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000} REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
587T Pipelayer Power Train Transmission
24M Motor Grader Machine Systems Blade Mounting
24M Motor Grader Machine Systems Muffler
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}
24M Motor Grader Machine Systems Ripper
C15 and C18 Generator Set Engines Engine Oil Filter Base - Remove