Main Relief Valve
Show/hide table
 | |
| Illustration 1 | g01237497 |
(1) Torque for six bolts ... 30 ± 4 N·m (22 ± 3 lb ft)
(2) Torque for nut ... 18 ± 4 N·m (13 ± 3 lb ft)
Show/hide table
 | |
| Illustration 2 | g01237511 |
(3) Torque for 6Y-4638 Hex Socket Plug ... 85 ± 10 N·m (65 ± 5 lb ft)
(4) 106-9212 Spring
- Length under the test force ... 62 mm (2.44 inch)
- Test Force ... 528 ± 26 N (119 ± 6 lb)
- Free length after the test ... 78.07 mm (3.07 inch)
- Outside diameter ... 3.6 mm (0.1417 inch)
- Test Force ... 528 ± 26 N (119 ± 6 lb)
(5) Torque for plug ... 23 ± 2 N·m (17 ± 1 lb ft)
Caterpillar Information System:
24M Motor Grader Machine Systems Articulation Cylinder Mounting
2006/02/06 An Improved Lip Type Seal Is Available for the Pump Drive {3108, 7555}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
2006/01/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
2006/02/06 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
Oil Pan and Gasket{1302, 1302} Oil Pan and Gasket{1302, 1302}
R1300G Series II Load Haul Dump Machine Electrical System Glow Plug
R1300G Series II Load Haul Dump Machine Systems Seat - Install
R1300G Series II Load Haul Dump Machine Systems Seat - Remove
M325D MH Material Handler Leaving the Machine
C15 and C18 Generator Set Engines Turbocharger - Disassemble
24M Motor Grader Machine Systems Drawbar
2006/03/27 A New Differential Ring Gear Is Now Used {3256, 3258, 3281}
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Sound Information and Vibration Information
C15 and C18 Generator Set Engines Turbocharger - Assemble
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000} REFERENCE CHART FOR QUICK DISCONNECTS ON WORK TOOLS{4283, 5057, 6700, 7000}
587T Pipelayer Power Train Transmission
24M Motor Grader Machine Systems Blade Mounting
24M Motor Grader Machine Systems Muffler
Field Service for Positive Pin Retention Track {4169, 4170, 4175} Field Service for Positive Pin Retention Track {4169, 4170, 4175}
2006/02/13 Enhanced Voltmeter Leads Are Now Available {0785}