Radiator and Hydraulic Oil Cooler - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
- Install Tooling (A). Install a suitable lifting device, as shown. Install hydraulic oil cooler and radiator (7). Install one end of hydraulic oil cooler and radiator (7) inward in order to clear the bolts on the link bracket. The weight of hydraulic oil cooler and radiator (7) is approximately 175 kg (385 lb).
Show/hide table
Illustration 1 | g01016629 |
- Install bolts (6) on the bottom of hydraulic oil cooler and radiator. Two bolts are located on each side of the hydraulic oil cooler and radiator.
Show/hide table
Illustration 2 | g01016633 |
- Install side brackets (5).
Show/hide table
Illustration 3 | g01016628 |
- Install side bracket (4). Install harness assembly and hose (1) that is routed to the reserve tank assembly for the engine coolant. Connect clips (2) and (3) .
Show/hide table
Illustration 4 | g01016621 |
End By: Install the radiator group. Refer to Disassembly and Assembly, "Radiator Group - Install".
Caterpillar Information System:
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Assemble
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Disassemble
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Remove
777F Off-Highway Truck Machine Lockout Control
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Engine Oil Filter Base and Oil Cooler - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Pump - Install - Engine In Chassis
587R Pipelayer Power Train Final Drive
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Temperature Regulator - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install - Engine In Chassis
PM-201 Cold Planer Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System)
583T Pipelayer Machine Systems Pipelayer Frame - Install - Left Side
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Electric Starting Motor - Remove and Install - Engine In Chassis
587R Pipelayer Machine Systems Boom Kickout Mechanism - Remove
2006/01/02 Torque the Engine Oil Filter Base Properly {1306}
2006/01/02 New Guidelines for Inspecting Pistons {1214}
587R Pipelayer Lifting Capacities
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
24M Motor Grader Safety Messages
24M Motor Grader Additional Messages
854K Wheel Dozer Brake Accumulator - Check
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install - Engine In Chassis
587R Pipelayer Hydraulic System Pilot Control Valve (Three-Way)
R1700G Load Haul Dump Alternate Exit
2006/01/16 Torque the Engine Oil Filter Base Properly {1306}