Radiator and Hydraulic Oil Cooler - Disassemble
Disassembly Procedure
Start By:
- Remove the hydraulic oil cooler and radiator assembly. Refer to Disassembly and Assembly, "Radiator and Hydraulic Oil Cooler - Remove".
- Remove bolts (1) for top channel (2) and remove top channel (2). Disconnect clip (4) from the lower radiator hose. Remove side bolts (3) and remove shroud (5).
Show/hide table
 | |
| Illustration 1 | g01016646 |
- Install a suitable lifting device to the radiator (6), as shown. Remove the radiator (6). The weight of the radiator is approximately 30 kg (65 lb).
Show/hide table
 | |
| Illustration 2 | g01016650 |
- Install a suitable lifting device to the hydraulic oil cooler core (7), as shown. Remove the hydraulic oil cooler core. The weight of the hydraulic oil cooler core is approximately 80 kg (175 lb).
Show/hide table
 | |
| Illustration 3 | g01016653 |
- Remove lower bolts (8) and remove side channels (9) .
Caterpillar Information System:
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Remove
777F Off-Highway Truck Machine Lockout Control
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Engine Oil Filter Base and Oil Cooler - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Pump - Install - Engine In Chassis
587R Pipelayer Power Train Final Drive
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Temperature Regulator - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install - Engine In Chassis
PM-201 Cold Planer Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System)
583T Pipelayer Machine Systems Pipelayer Frame - Install - Left Side
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Electric Starting Motor - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Belt Tensioner - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Hood Tilt Pump and Motor - Remove and Install
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Assemble
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Install
587R Pipelayer Machine Systems Boom Kickout Mechanism - Remove
2006/01/02 Torque the Engine Oil Filter Base Properly {1306}
2006/01/02 New Guidelines for Inspecting Pistons {1214}
587R Pipelayer Lifting Capacities
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
24M Motor Grader Safety Messages
24M Motor Grader Additional Messages
854K Wheel Dozer Brake Accumulator - Check
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install - Engine In Chassis
587R Pipelayer Hydraulic System Pilot Control Valve (Three-Way)