Radiator and Hydraulic Oil Cooler - Assemble
Assembly Procedure
- Install a suitable lifting device to the hydraulic oil cooler core (7) , as shown. Install the hydraulic oil cooler core (7). The weight of the hydraulic oil cooler core is approximately 80 kg (175 lb).
Show/hide table
Illustration 1 | g01016653 |
- Install side channels (9) and install lower bolts (8) .
- Install a suitable lifting device to the radiator (6) , as shown. Install the radiator. The weight of the radiator is approximately 30 kg (65 lb).
Show/hide table
Illustration 2 | g01016650 |
- Install shroud (5) and install side bolts (3). Install the top channel and install bolts (1) for top channel (2). Connect clip (4) for lower radiator hose.
Show/hide table
Illustration 3 | g01016646 |
End By: Install the hydraulic oil cooler and radiator assembly. Refer to Disassembly and Assembly, "Radiator and Hydraulic Oil Cooler - Install".
Caterpillar Information System:
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Disassemble
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Remove
777F Off-Highway Truck Machine Lockout Control
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Engine Oil Filter Base and Oil Cooler - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Pump - Install - Engine In Chassis
587R Pipelayer Power Train Final Drive
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Water Temperature Regulator - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install - Engine In Chassis
PM-201 Cold Planer Machine Systems Hydraulic Schematic (Auxiliary Hydraulic System)
583T Pipelayer Machine Systems Pipelayer Frame - Install - Left Side
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Electric Starting Motor - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Belt Tensioner - Remove and Install - Engine In Chassis
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Radiator and Hydraulic Oil Cooler - Install
587R Pipelayer Machine Systems Boom Kickout Mechanism - Remove
2006/01/02 Torque the Engine Oil Filter Base Properly {1306}
2006/01/02 New Guidelines for Inspecting Pistons {1214}
587R Pipelayer Lifting Capacities
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
24M Motor Grader Safety Messages
24M Motor Grader Additional Messages
854K Wheel Dozer Brake Accumulator - Check
511, 521, 522 and 532 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install - Engine In Chassis
587R Pipelayer Hydraulic System Pilot Control Valve (Three-Way)
R1700G Load Haul Dump Alternate Exit