C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Alternator Mounting

Usage:

826K 2L3


图 1g02542436
发动机右视图

表 1
235-2471 充电交流发电机总成技术规格 
项目  数量  零件  技术规格说明 
0V-0375 螺栓  拧紧至扭矩为 85 ± 10 N·m (63 ± 7 lb ft)。 
2K-4821 锁紧螺母  拧紧至扭矩为 102 ± 7 N·m (75 ± 5 lb ft)。 

Caterpillar Information System:

966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 1400 - FMI 06
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
AP-1000D and BG-260D Asphalt Pavers Machine Systems Electric Motor (Screed Burner Fuel Pump) - Remove and Install
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
793D Off-Highway Truck Air System and Brakes Relief Valve (Brake Oil Cooler) - Test and Adjust
M325D MH Material Handler Air Conditioning and Heating Control
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Configure
CB-534D, CB-534D Series XW and CB-564D Vibratory Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
D7R Series 2 Track-Type Tractor Power Train Bevel and Transfer Gears
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove
R1300G Series II Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
R1300G Series II Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
416E Backhoe Loader Extendable Stick Pads - Inspect/Adjust - If Equipped
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Sensors
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Relief Valve (Load Sensing Signal)
AP-1000D and BG-260D Asphalt Pavers Machine Systems Hydraulic Cylinder (Screed Hoist)
R1600G Load Haul Dump Power Train Final Drive and Wheel - Disassemble
R1600G Load Haul Dump Power Train Final Drive and Wheel - Assemble
R1600G Load Haul Dump Power Train Final Drive and Wheel - Install
R1600G Load Haul Dump Power Train Final Drive and Wheel - Remove
R1600G Load Haul Dump Power Train Wheel Spindle - Remove and Install
793D Off-Highway Truck Power Train Transmission Hydraulic Control Clutch Pressure - Test
R1300G Series II Load Haul Dump Power Train Torque Converter Case
2005/10/17 An Increased Torque Replaces The Use of Anti-seize Compound on the Rear Wheel Group. {4201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.