R1600G Load Haul Dump Power Train Caterpillar


Final Drive and Wheel - Remove

Usage:

R1600G 9PP

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     9EL3121     提升支架     1    

开始:

  1. 拆卸轮胎和轮辋。 请参阅拆解和组装, "轮胎和轮辋 - 拆卸和安装"。
  2. 拆卸车桥轮轴。 请参阅拆解和组装, "半轴 - 拆卸"。

注: 下列步骤是对前车桥执行。 每个终传动和车轮的拆卸步骤相同。


注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。





    图 1g01206466

  1. 将工具 (A) 和适合的起吊设备安装到终传动和车轮 (1) 上。 终传动和车轮 (1) 的重量约为 272 kg (600 lb)。

  1. 拆下 16 个螺母 (2) 和垫圈。 拆下终传动和车轮 (1) 。



    图 2g01206467

  1. 拆下 O 形密封圈 (3) 。

Caterpillar Information System:

R1600G Load Haul Dump Power Train Final Drive and Wheel - Install
R1600G Load Haul Dump Power Train Final Drive and Wheel - Assemble
R1600G Load Haul Dump Power Train Final Drive and Wheel - Disassemble
AP-1000D and BG-260D Asphalt Pavers Machine Systems Hydraulic Cylinder (Screed Hoist)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Relief Valve (Load Sensing Signal)
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Sensors
416E Backhoe Loader Extendable Stick Pads - Inspect/Adjust - If Equipped
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 1400 - FMI 06
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
AP-1000D and BG-260D Asphalt Pavers Machine Systems Electric Motor (Screed Burner Fuel Pump) - Remove and Install
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
R1600G Load Haul Dump Power Train Wheel Spindle - Remove and Install
793D Off-Highway Truck Power Train Transmission Hydraulic Control Clutch Pressure - Test
R1300G Series II Load Haul Dump Power Train Torque Converter Case
2005/10/17 An Increased Torque Replaces The Use of Anti-seize Compound on the Rear Wheel Group. {4201}
793D Off-Highway Truck Steering System Pressure Switches
793D Off-Highway Truck Power Train Transmission Hydraulic Control Shift Signal Pressure - Test
793D Off-Highway Truck Power Train Lubrication Relief Valve (Transmission) Pressure - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Service Tools
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Diagnostic Capabilities
854K Wheel Dozer and 992K Wheel Loader Power Train Using the Operator Monitor to Determine Diagnostic Codes
G3304 and G3306 Engines Electric Starting Motor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.