The basic machine specifications are listed in the table below.
Note: Optional equipment will affect these dimensions and weight.
Show/hide table
Table 1
| AP-1000D and BG-260D Pavers |
| Approximate Weight |
14728 kg (32470 lb) |
| Maximum Length(1) |
4980 mm (16 ft 4 inch) |
| Width |
3230 mm (10 ft 7 inch) |
| Height |
3600 mm (11 ft 10 inch) |
Show/hide table
| (1) |
Maximum length with push roller |
Show/hide table
Table 2
| AP-1000D and BG-260D with 10B Pavemaster Screed |
| Approximate Weight |
18455 kg (40650 lb) |
| Maximum Length(1) |
6358 mm (20 ft 10 inch) |
| Width |
3342 mm (11 ft) |
| Height |
3600 mm (11 ft 10 inch) |
Show/hide table
| (1) |
Maximum length with push roller |
Show/hide table
Table 3
| AP-1000D and BG-260D with 10-20B Extend-A-Mat Screed |
| Approximate Weight |
18000 kg (39700 lb) |
| Maximum Length(1) |
6740 mm (22 ft 1 inch) |
| Width |
3330 mm (10 ft 11 inch) |
| Height |
3600 mm (11 ft 10 inch) |
Show/hide table
| (1) |
Maximum length with push roller |
Show/hide table
Table 4
| AP-1000D and BG-260D with 10-20WB Extend-A-Mat Screed |
| Approximate Weight |
18728 kg (41288 lb) |
| Maximum Length(1) |
6905 mm (22 ft 8 inch) |
| Width |
3330 mm (10 ft 11 inch) |
| Height |
3600 mm (11 ft 10 inch) |
Show/hide table
| (1) |
Maximum length with push roller |
Show/hide table
Table 5
| AP-1000D and BG-260D with AS-2301 Screed |
| Approximate Weight |
18300 kg (40300 lb) |
| Maximum Length(1) |
6540 mm (21 ft 6 inch) |
| Width |
3380 mm (11 ft 1 inch) |
| Height |
3600 mm (11 ft 10 inch) |
Show/hide table
| (1) |
Maximum length with push roller |
Intended Use
An Asphalt Paver is a mobile road construction machine used for placement of paved surfaces using bulk material - most commonly, hot mix asphalt - supplied by delivery vehicles to the paver's front hopper.
The AP-1000D Asphalt Paver is a heavy duty paver that can place paving surfaces for many applications including (but not limited to) parking lots, roads and streets, highways and motorways. It accepts delivery of asphalt mix from a truck or material transfer vehicle at the front and contains the mix in a hopper. Slat conveyors move the mix from the hopper to the rear where the mix flows onto the ground ahead of the screed. Flight augers convey the deposited mix laterally to the specified width as controlled by the screed. The screed, towed by the tractor, shapes and levels the mix to the specified dimensions. The slope and grade of the final asphalt surface is precisely controlled to achieve a high degree of flatness using sensors and references mounted on the paver. The paver can be configured with different types of screeds to satisfy common customer paving requirements.