Piston Motor (Front Propel) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 136-1452     | 挡圈钳组件     | 1     |
开始:
- 拆下活塞马达。 请参阅拆解和组装, "活塞马达 - 拆卸"。
- 拆下螺栓 (1) 和盖 (2) 。
Show/hide table
图 1 | g01181031 |
- 拆卸密封垫 (3) 。
Show/hide table
图 2 | g01181032 |
- 拆下螺塞 (4) 。
Show/hide table
图 3 | g01181033 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下螺塞 (5) 。
- 拆下弹簧 (8) 和护圈 (7) 。
Show/hide table
图 4 | g01181034 |
- 拆下滑阀 (6) 。
- 对于另一侧重复步骤 4 至步骤 5。
- 拆下螺栓 (9) 和盖 (10) 。
Show/hide table
图 5 | g01181035 |
- 拆下 O 形密封圈 (11) 和活塞 (12) 。
Show/hide table
图 6 | g01181036 |
- 拆下板 (13) 。
Show/hide table
图 7 | g01181037 |
- 拆下孔板 (14) 、轴承 (15) 和柱塞筒 (16) 。
Show/hide table
图 8 | g01181038 |
- 拆下十字轴组件 (17) 。
Show/hide table
图 9 | g01181039 |
- 拆下销 (18) 和轴承 (19) 。
Show/hide table
图 10 | g01181040 |
- 使用工具 (A) 以便拆下挡圈 (20) 。
Show/hide table
图 11 | g01181041 |
- 拆下盖 (21) 。
- 拆下密封件 (22) 。
Show/hide table
图 12 | g01181042 |
- 拆下 O 型密封圈 (23) 。
Show/hide table
图 13 | g01181043 |
- 使用工具 (A) 拆下挡圈 (24) 。
- 拆下螺栓 (26) 和壳体 (25) 。
- 拆下密封垫 (27) 。
Show/hide table
图 14 | g01181045 |
- 使用工具 (A) 拆下挡圈 (28) 。
- 拆下隔套 (29) 。
- 使用合适的压具将旋转总成 (30) 从壳体 (31) 上拆下。
注: 旋转总成不得掉落。
Show/hide table
图 15 | g01181046 |
Caterpillar Information System:
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Fuel System Water Separator - Drain
2005/07/04 New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/07/18 Governor Cable Assembly Is Improved {1265}
RM-300 Reclaimer Mixer Engine Supplement Alternator - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Relief Valve (Hood Tilt) - Test and Adjust
C6.6 Engines for Caterpillar Built Machines Cylinder Block
RM-300 Reclaimer Mixer Machine Systems Relief Valve (Parking Brake/Transmission Hydraulic Control) - Test and Adjust
AccuGradeTM - Grade Control System (GPS/ATS/Sonic/Cross Slope) Light Bar
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Differential and Bevel Gear - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Differential and Bevel Gear - Remove
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Fuel System Filter and Water Separator - Replace
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Parking Brake - Test
RM-500 Road Reclaimer/Soil Stabilizer Power Train Piston Motor (Front Propel) - Assemble
RM-300 Reclaimer Mixer Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
966H Wheel Loader and 972H Wheel Loader Power Train Oil Filter (Power Train)
2005/07/04 Correction to Specifications, "Pressure Switch (Axle Oil)" {1408}
2005/07/18 Correction to Specifications, "Pressure Switch (Residual Brake Oil)" {1408}
2005/07/25 Correction to Systems Operation Testing and Adjusting, "Axle Oil Cooler" {1365, 1408}
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic Oil Sample - Obtain
RM-300 Reclaimer Mixer Machine Systems Sequence Valve - Test and Adjust
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Oscillating Axle (Rear) - Remove
TH350B, TH360B, TH460B and TH560B Telehandlers Hydraulic System Lowering Control Pump (Electric) - If Equipped
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Oscillating Axle (Rear) - Install
966H Wheel Loader and 972H Wheel Loader Power Train Modulating Valve (Transmission Clutch)