Battery - Remove and Install
Removal Procedure
- Turn the battery disconnect switch into the OFF position.
- Disconnect negative cable assembly (1). Disconnect positive cable assembly (5). Remove nuts (3) and battery hold down (2). Remove battery (4) .
Show/hide table
 | |
| Illustration 1 | g01171735 |
Installation Procedure
- Install battery (4). Install battery hold down (2) and nuts (3). Connect positive cable assembly (5). Connect negative cable assembly (1).
Show/hide table
| | |
| Illustration 2 | g01171735 |
- Turn the battery disconnect switch into the ON position.
Caterpillar Information System:
2005/11/28 An Improved Pilot Cartridge Valve Is Available for the Implement Pilot Valves {5059}
TH210 and TH215 Telehandlers Engine Supplement Muffler - Remove and Install
966H Wheel Loader and 972H Wheel Loader Steering System Check Valve (Steering Quad) (Command Control Steering)
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Air Cleaner - Remove and Install
TH210 and TH215 Telehandlers Engine Supplement Alternator - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Propel System Rotary Position Sensor (Brake Pedal) - Test and Adjust
793D Off-Highway Truck/Tractor Piston Motor (Rear Axle Lubrication) - Assemble
793D Off-Highway Truck/Tractor Piston Motor (Rear Axle Lubrication) - Disassemble
TH210 and TH215 Telehandlers Engine Supplement Refrigerant Compressor - Remove and Install
3044C Industrial Engine Cold Weather Operation
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Stabilizer Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Solenoid Valve (Transmission Clutch)
730 EJECTOR Articulated Truck Machine Systems Pressure Reducing Valve (Ejector System Pilot Pressure) - Test and Adjust
730 EJECTOR Articulated Truck Machine Systems Ejector Control Valve - Test
730 EJECTOR Articulated Truck Machine Systems General Information Table
TH210 and TH215 Telehandlers Engine Supplement Gear Pump (Hydraulic Fan) - Remove
TH210 and TH215 Telehandlers Engine Supplement Gear Pump (Hydraulic Fan) - Install
C4.4 Industrial Engine Battery Electrolyte Level - Check
TH210 and TH215 Telehandlers Engine Supplement Engine Enclosure - Remove and Install
C4.4 Industrial Engine Engine - Clean
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Install