Piston Motor (Rear Axle Lubrication) - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 1P-1861     | 挡圈钳     | 1     |
B     | 4C-5656     | 适配器     | 1     |
126-7183 | 十字挡块     | 1     | |
126-7182 | 螺母     | 1     | |
126-7181 | 滑板     | 4     | |
126-7177 | 拉拔器腿     | 2     | |
5P-4808 | 盖     | 2     | |
1B-4430 | 安全螺母     | 2     | |
D     | 1P-1860     | 挡圈钳     | 1     |
- 采用适当的压具以将轴承套件 (21) 安装到轴 (22) 上。
Show/hide table
图 1 | g01172199 |
- 使用工具 (D) 安装挡圈 (20) 。
Show/hide table
图 2 | g01171636 |
- 将密封件 (8) 安装到盖 (7) 中。 将垫片 (10) 、盖 (7) 和挡圈 (6) 安装到轴祖件 (22) 上。
Show/hide table
图 3 | g01172201 |
- 用高度计测量轴承组件。 正确的尺寸为 76.70 + 0.0 − 0.100 mm (3.020 + 0.00 − 0.0039 in)。 该测量确定旋转总成的正确角度。
Show/hide table
图 4 | g01172202 |
- 如有必要,增加或减少垫片 (10) 。
- 获得正确的尺寸后,从轴 (22) 安装挡圈 (6) 、盖 (7) 和垫片 (10) 。
- 将中心销 (19) 和轴承 (18) 安装到护圈 (16) 上。
Show/hide table
图 5 | g01171634 |
- 安装活塞 (17) 。
Show/hide table
图 6 | g01171632 |
- 安装护圈 (16) 和螺栓 (15) 。
- 将垫圈 (14) 和弹簧 (13) 安装到柱塞缸组件 (12) 中。
Show/hide table
图 7 | g01171631 |
- 安装柱塞缸组件 (12) 。
Show/hide table
图 8 | g01171627 |
- 加热壳体 (3) 。 降低旋转总成 (11) 温度。
Show/hide table
图 9 | g01172204 |
- 将旋转总成 (11) 安装到壳体 (3) 中。 在安装步骤中不要使柱塞缸从活塞分离。
- 安装垫片 (10) 和 O 形密封圈 (9) 。
Show/hide table
图 10 | g01171625 |
- 安装唇形密封 (8) 。
Show/hide table
图 11 | g01171624 |
- 安装盖 (7) 。
Show/hide table
图 12 | g01171622 |
- 使用工具 (A) 以便安装挡圈 (6) 。
- 将O 形密封圈 (4) 和配流盘 (5) 安装到壳体 (3) 中。
Show/hide table
图 13 | g01171621 |
- 安装盖 (2) 和螺栓 (1) 。
Show/hide table
图 14 | g01171618 |
End By: 安装活塞马达。 请参阅 拆解和组装, "活塞马达(后桥润滑)- 安装"。
Caterpillar Information System:
793D Off-Highway Truck/Tractor Piston Motor (Rear Axle Lubrication) - Disassemble
TH210 and TH215 Telehandlers Engine Supplement Refrigerant Compressor - Remove and Install
3044C Industrial Engine Cold Weather Operation
793D Off-Highway Truck/Tractor Gear Pump (Rear Axle Lube) - Assemble
793D Off-Highway Truck Power Train Gear Pump (Rear Axle Lube) - Disassemble
M325D MH Material Handler Cab Door
TK741, TK751 and TK752 Track Feller Bunchers Mounting Steps and Handles for Machine Maintenance
M325D MH Material Handler Storage and Literature Compartment
RM-300 Reclaimer Mixer Machine Systems Steering System Troubleshooting
M325D MH Material Handler Monitoring System
TH210 and TH215 Telehandlers Engine Supplement Expansion Tank - Remove and Install
C4.4 (Mech) Industrial Engine Starting with Jump Start Cables
AP-1055D and BG-2455D Asphalt Pavers Propel System Rotary Position Sensor (Brake Pedal) - Test and Adjust
TH210 and TH215 Telehandlers Engine Supplement Alternator - Remove and Install
TH210 and TH215 Telehandlers Engine Supplement Air Cleaner - Remove and Install
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
966H Wheel Loader and 972H Wheel Loader Steering System Check Valve (Steering Quad) (Command Control Steering)
TH210 and TH215 Telehandlers Engine Supplement Muffler - Remove and Install
2005/11/28 An Improved Pilot Cartridge Valve Is Available for the Implement Pilot Valves {5059}
TH210 and TH215 Telehandlers Engine Supplement Battery - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Stabilizer Cylinder
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Solenoid Valve (Transmission Clutch)
730 EJECTOR Articulated Truck Machine Systems Pressure Reducing Valve (Ejector System Pilot Pressure) - Test and Adjust