Solenoid Valve (Transmission Clutch)
Show/hide table
Illustration 1 | g03525237 |
Show/hide table
Specification for 186-1526 Solenoid Valve Gp     | |||
Item     | Qty     | Part     | Specification description     |
1     | 1     | 104-3947 Locknut     | Torque to 20.0 ± 2.5 N·m (177.0 ± 22.1 lb in).     |
2     | 1     | 301-3118 Coil     | Nominal voltage is 24 VDC. Resistance at 25 ± 5 °C (77 ± 9 °F) is 31 ± 3 ohms.     |
3     | 1     | 234-6666 Valve Cartridge As     | Final installation torque is 50 ± 5 N·m (37 ± 4 lb ft).     |
Caterpillar Information System:
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Stabilizer Cylinder
TH210 and TH215 Telehandlers Engine Supplement Battery - Remove and Install
2005/11/28 An Improved Pilot Cartridge Valve Is Available for the Implement Pilot Valves {5059}
TH210 and TH215 Telehandlers Engine Supplement Muffler - Remove and Install
966H Wheel Loader and 972H Wheel Loader Steering System Check Valve (Steering Quad) (Command Control Steering)
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Air Cleaner - Remove and Install
TH210 and TH215 Telehandlers Engine Supplement Alternator - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Propel System Rotary Position Sensor (Brake Pedal) - Test and Adjust
793D Off-Highway Truck/Tractor Piston Motor (Rear Axle Lubrication) - Assemble
793D Off-Highway Truck/Tractor Piston Motor (Rear Axle Lubrication) - Disassemble
730 EJECTOR Articulated Truck Machine Systems Pressure Reducing Valve (Ejector System Pilot Pressure) - Test and Adjust
730 EJECTOR Articulated Truck Machine Systems Ejector Control Valve - Test
730 EJECTOR Articulated Truck Machine Systems General Information Table
TH210 and TH215 Telehandlers Engine Supplement Gear Pump (Hydraulic Fan) - Remove
TH210 and TH215 Telehandlers Engine Supplement Gear Pump (Hydraulic Fan) - Install
C4.4 Industrial Engine Battery Electrolyte Level - Check
TH210 and TH215 Telehandlers Engine Supplement Engine Enclosure - Remove and Install
C4.4 Industrial Engine Engine - Clean
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Install
966H Wheel Loader and 972H Wheel Loader Steering System Metering Pump (HMU Steering)
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Disassemble