Gear Pump (Hydraulic Fan) - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 6V-3155 | Brace | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Raise the boom and install Tooling (A) .
Show/hide table
 | |
| Illustration 1 | g01171955 |
- Remove bolts (1) and grill (2) .
Show/hide table
 | |
| Illustration 2 | g01171791 |
- Disconnect exhaust pipe (3) .
Show/hide table
 | |
| Illustration 3 | g01171792 |
Show/hide table
 | |
| Illustration 4 | g01171795 |
- Remove nuts (4) and remove exhaust pipe (3) .
- Disconnect hose assemblies (5) and (8). Remove bolts (6) and gear pump (7) .
Show/hide table
 | |
| Illustration 5 | g01171797 |
Caterpillar Information System:
730 EJECTOR Articulated Truck Machine Systems General Information Table
730 EJECTOR Articulated Truck Machine Systems Ejector Control Valve - Test
730 EJECTOR Articulated Truck Machine Systems Pressure Reducing Valve (Ejector System Pilot Pressure) - Test and Adjust
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Solenoid Valve (Transmission Clutch)
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Stabilizer Cylinder
TH210 and TH215 Telehandlers Engine Supplement Battery - Remove and Install
2005/11/28 An Improved Pilot Cartridge Valve Is Available for the Implement Pilot Valves {5059}
TH210 and TH215 Telehandlers Engine Supplement Muffler - Remove and Install
966H Wheel Loader and 972H Wheel Loader Steering System Check Valve (Steering Quad) (Command Control Steering)
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Transmission Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Air Cleaner - Remove and Install
TH210 and TH215 Telehandlers Engine Supplement Gear Pump (Hydraulic Fan) - Install
C4.4 Industrial Engine Battery Electrolyte Level - Check
TH210 and TH215 Telehandlers Engine Supplement Engine Enclosure - Remove and Install
C4.4 Industrial Engine Engine - Clean
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Remove
TH210 and TH215 Telehandlers Engine Supplement Hydraulic Oil Cooler - Install
966H Wheel Loader and 972H Wheel Loader Steering System Metering Pump (HMU Steering)
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Piston Motor (Fan Drive) - Assemble
793D Off-Highway Truck Lifting and Tying Down the Machine
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train Steering Frame Lock - Separate and Connect
2005/06/13 Correction to Testing and Adjusting , "Relief Valve (Implement) - Test and Adjust" {5050, 5050, 7000}