Electronic Display Module
The Vital information management system (VIMS) can display a CID-FMI from the engine control system. The CID-FMI from the engine control system can be read on the message center when the main display module is in service mode. Refer to the Operation and Maintenance Manual for more information on the Vital Information Management System (VIMS).
Show/hide table
 | |
| Illustration 1 | g01153517 |
Component locations (1) Vital information management system (VIMS) (2) Keyswitch (3) Starting aid switch (4) Throttle lock switch (5) Diagnostic connector (6) Right brake (7) Throttle | |
Caterpillar Information System:
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Visual Inspection
C9 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Parking Brake System
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Adjust
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System Troubleshooting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication Pump
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
R2900G Load Haul Dump C15 Engine Supplement Turbocharger - Install - In Machine
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C18 Engines for Caterpillar Built Machines Event Codes
C7 Engines for Caterpillar Built Machines Cylinder Head - Remove
730 EJECTOR Articulated Truck Body Mounting - Lubricate
2008/04/14 Understanding the Quick Coupler to Work Tool Interface For Certain Cat Machines {6101, 6129, 6402, 6542}
2005/03/21 A Crankcase Breather Element is Now Serviced {1317}
C7 Engines for Caterpillar Built Machines Cylinder Head - Install
730C2 EJECTOR Articulated Truck Ejector Blade Alignment - Check/Adjust
2005/04/25 New Warning Indicator Module is Now Used {7431}
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test