Rocker Shaft and Pushrod - Remove
拆卸步骤
开始:
- 拆下气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在每个摇臂和每个推杆上作识别标记，以标识其在发动机上的正确安装位置。
- 松开摇臂调整螺钉 (4) 。
Show/hide table
 | |
| 图 1 | g01153544 |
- 拆下螺栓 (1) 、 (2) 和摇臂轴 (3) 。
- 拆卸进气阀桥 (5) 和推杆 (6) 。
Caterpillar Information System:
3516B Engine for 994F and 994H Wheel Loaders Electronic Display Module
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Visual Inspection
C9 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Parking Brake System
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Adjust
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System Troubleshooting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication Pump
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C18 Engines for Caterpillar Built Machines Event Codes
C7 Engines for Caterpillar Built Machines Cylinder Head - Remove
730 EJECTOR Articulated Truck Body Mounting - Lubricate
2008/04/14 Understanding the Quick Coupler to Work Tool Interface For Certain Cat Machines {6101, 6129, 6402, 6542}
2005/03/21 A Crankcase Breather Element is Now Serviced {1317}
C7 Engines for Caterpillar Built Machines Cylinder Head - Install
730C2 EJECTOR Articulated Truck Ejector Blade Alignment - Check/Adjust
2005/04/25 New Warning Indicator Module is Now Used {7431}
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for Caterpillar Built Machines Camshaft - Remove