Cylinder Head - Remove
拆卸步骤
开始:
- 拆下气门机构罩盖底座。 请参阅拆解和组装, "气门机构罩盖底座 - 拆卸和安装"。
- 拆下摇臂轴和推杆。 请参阅拆解和组装, "摇臂轴和推杆 - 拆卸"。
- 拆下单体喷油器。 请参阅拆解和组装, "单体喷油器 - 拆卸"。
- 拆卸风扇驱动装置支架总成。 请参阅拆解和组装, "风扇驱动装置支架总成 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 断开线束组件 (1) 、 (2) 、 (3) 、 (4) 和 (5) 。
Show/hide table
 | |
| 图 1 | g01153598 |
- 断开软管组件 (6) 和管组件 (7) 。
Show/hide table
 | |
| 图 2 | g01153599 |
- 从涡轮增压器 (9) 断开管组件 (8) 和 (10) 。
Show/hide table
 | |
| 图 3 | g01153600 |
- 将合适的起吊设备连接到缸盖 (11) 。 缸盖 (11) 的重量约为 175 kg (385 lb)。
Show/hide table
 | |
| 图 4 | g01153645 |
- 拆下螺栓 (12) 和螺栓 (13) 。 从缸体拆卸缸盖 (11) 和密封垫。
Caterpillar Information System:
C18 Engines for Caterpillar Built Machines Event Codes
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3516B Engine for 994F and 994H Wheel Loaders Electronic Display Module
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Visual Inspection
C9 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Parking Brake System
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Adjust
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System Troubleshooting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
730 EJECTOR Articulated Truck Body Mounting - Lubricate
2008/04/14 Understanding the Quick Coupler to Work Tool Interface For Certain Cat Machines {6101, 6129, 6402, 6542}
2005/03/21 A Crankcase Breather Element is Now Serviced {1317}
C7 Engines for Caterpillar Built Machines Cylinder Head - Install
730C2 EJECTOR Articulated Truck Ejector Blade Alignment - Check/Adjust
2005/04/25 New Warning Indicator Module is Now Used {7431}
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for Caterpillar Built Machines Camshaft - Remove
730 EJECTOR Articulated Truck Ejector Cylinder Pivot - Lubricate
C7 Engines for Caterpillar Built Machines Camshaft - Install
730 EJECTOR Articulated Truck Tailgate - Lubricate