Rocker Shaft and Pushrod - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 8T-2998 | 润滑剂 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在推杆 (6) 两端涂抹工具 (A) 。
Show/hide table
 | |
| 图 1 | g01153544 |
- 用清洁的发动机机油润滑推杆 (6) 。 安装推杆 (6) 和进气阀桥 (5) 。
- 定位摇臂轴 (3) 。 安装螺栓 (1) 和螺栓 (2) 。 用手拧紧螺栓 (1) 和螺栓 (2) 。 将螺栓 (2) 和 (1) 上紧到标准扭矩。
- 在各个摇臂底面上涂抹工具 (A) 。
- 通过转动摇臂调整螺钉 (4) ，调整摇臂气门间隙。 请参阅测试与调整, "发动机气门间隙 - 检查 / 调整"。
End By: 安装气门机构盖。 请参阅 拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
3516B Engine for 994F and 994H Wheel Loaders Electronic Display Module
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Visual Inspection
C9 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Parking Brake System
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Adjust
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Electrical System - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Automatic Lubrication System Troubleshooting
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System System Pressure - Release
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System Lubrication Pump
C11 and C15 Engines for Caterpillar Built Machines CID 0102 FMI 04 Boost Pressure Sensor short to ground
C18 Engines for Caterpillar Built Machines Event Codes
C7 Engines for Caterpillar Built Machines Cylinder Head - Remove
730 EJECTOR Articulated Truck Body Mounting - Lubricate
2008/04/14 Understanding the Quick Coupler to Work Tool Interface For Certain Cat Machines {6101, 6129, 6402, 6542}
2005/03/21 A Crankcase Breather Element is Now Serviced {1317}
C7 Engines for Caterpillar Built Machines Cylinder Head - Install
730C2 EJECTOR Articulated Truck Ejector Blade Alignment - Check/Adjust
2005/04/25 New Warning Indicator Module is Now Used {7431}
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for Caterpillar Built Machines Camshaft - Remove
730 EJECTOR Articulated Truck Ejector Cylinder Pivot - Lubricate