Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
拆卸步骤
开始:
- 卸下驾驶室。 请参阅拆解和组装, "驾驶室 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 在所有软管、所有软管组件、所有导线及所有管组件上作出识别标记,以便安装。 插接好所有软管组件和所有管组件。 这将有助于防止液体渗漏,并有助于防止污染物进入系统。
- 断开软管组件 (4) 。 断开线束组件 (1) 。 拆下螺栓 (3) 和调节阀 (2) 。
Show/hide table
图 1 | g01149014 |
- 从调节阀 (2) 上拆下密封圈 (5) 。
Show/hide table
图 2 | g01149244 |
- 拆下螺母 (6) 和线圈组件 (7) 。
Show/hide table
图 3 | g01146453 |
- 将阀芯组件 (8) 从阀体 (9) 上拆下。
Show/hide table
图 4 | g01146454 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 从阀芯组件 (8) 上拆下 O 形密封圈 (10) 。
Show/hide table
图 5 | g01146457 |
- 从阀体 (9) 拆下滑阀组件 (11) 和弹簧 (12) 。
Show/hide table
图 6 | g01146460 |
安装步骤
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将滑阀组件 (11) 和弹簧 (12) 装入阀体 (9) 中。
Show/hide table
图 7 | g01146460 |
- 将 O 形密封圈 (10) 安装到阀芯组件 (8) 上。
Show/hide table
图 8 | g01146457 |
- 将阀芯组件 (8) 装入阀体 (9) 中。 拧紧芯组件 (8) 至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)。
Show/hide table
图 9 | g01146454 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 安装线圈组件 (7) 和螺母 (6) 。 拧紧螺母 (6) 至扭矩为 13 ± 2 N·m (10 ± 1 lb ft)。
Show/hide table
图 10 | g01146453 |
- 在调节阀 (2) 上安装新的密封圈 (5) 。
Show/hide table
图 11 | g01149244 |
- 定位调节阀 (2) 后安装螺栓 (3) 。 拧紧螺栓 (3) ,使其扭矩达到 30 ± 4 N·m (266 ± 35 lb in)。 连接线束组件 (1) 。 连接软管组件 (4) 。
Show/hide table
图 12 | g01149014 |
End By: 安装驾驶室。 请参阅 拆解和组装, "驾驶室 - 安装"。
Caterpillar Information System:
2005/03/07 New Clamp for the Water Lines {1380}
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
793D Off-Highway Truck/Tractor Solenoid Valve (Air Start) - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Install
C9 Engines for Caterpillar Built Machines Unit Injector - Remove
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Stick - Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Circuit Breakers - Reset
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install - Two Cylinder
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Remove
2005/03/07 Improved Alternator Adjusting Rod {1405}
2005/03/07 Improved Alternator Adjusting Rod {1405}
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Impeller Clutch) - Remove and Install
2006/09/11 A New Exhaust Bypass Valve (Wastegate) is Used {1057}
RM-300 Soil Stabilizer Sound Information and Vibration Information
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System Automatic Lubrication System Air - Purge
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System General Information
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Automatic Lubrication System General Information
773E Off-Highway Truck/Tractor and 775E Quarry Truck Additional Messages
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Torque Converter Outlet) - Remove
PM-200 Cold Planer Before Starting Engine
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Torque Converter Outlet) - Install