Air Compressor Drive Gear - Install - Two Cylinder
安装步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 132-5451     | 固定夹具     | 1     |
注: 卡特彼勒使用配备锥形轴或直轴的空气压缩机。 由于使用各种不同的曲轴类型,空气压缩机曲轴上的螺母扭矩也不同。
注: 确定具体应用中空气压缩机的制造商。
- 在空气压缩机上安装空气压缩机驱动齿轮 (1) 。
Show/hide table
图 1 | g01148907 |
- 在空气压缩机驱动齿轮 (1) 上安装工具 (A) 。
- 安装螺母 (2) 。
Bendix 空气压缩机上的锥形轴
- 拧紧螺母 (2) 到扭矩 160 ± 15 N·m (118 ± 11 lb ft)。
- 使用软面锤,轴向轻敲齿轮,以使齿轮座在锥形曲轴上。
- 重新拧紧螺母到扭矩 160 ± 15 N·m (118 ± 11 lb in)。
Bendix 空气压缩机上的直轴
- 拧紧螺母 (2) 到扭矩 460 ± 60 N·m (340 ± 44 lb ft)。
Wabco 250 空气压缩机
- 拧紧螺母 (2) 到扭矩 150 ± 5 N·m (111 ± 4 lb ft)。
- 在螺母上作一个指示标记,然后转动螺母 (2) 额外 60 ± 5 度。
End By: 安装空气压缩机。 请参阅 解体和组装, "空气压缩机 - 拆卸和安装"。
Caterpillar Information System:
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Remove
2005/02/28 A New Fuel Return Line is Now Used {1274}
R2900G Load Haul Dump Machine Systems Hydraulic Tank - Install
R2900G Load Haul Dump Machine Systems Hydraulic Tank - Remove
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System Lubrication Pump
R2900G Load Haul Dump C15 Engine Supplement Radiator - Install
R2900G Load Haul Dump C15 Engine Supplement Radiator - Remove
2005/04/04 Addition to Specifications "Air Inlet and Exhaust Lines" {1058, 1061}
2005/04/04 New Bolt and Spacer for the Air Inlet Manifold {1058}
793D Off-Highway Truck/Tractor Brake Oil Tank - Install
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Install - C32
769D Off-Highway Truck/Tractor and 771D Quarry Truck Circuit Breakers - Reset
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Stick - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Remove
C9 Engines for Caterpillar Built Machines Unit Injector - Remove
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Install
C9 Engines for Caterpillar Built Machines Unit Injector - Install
793D Off-Highway Truck/Tractor Solenoid Valve (Air Start) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
2005/03/07 New Clamp for the Water Lines {1380}
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2005/03/07 Improved Alternator Adjusting Rod {1405}
2005/03/07 Improved Alternator Adjusting Rod {1405}