C9 Engines for Caterpillar Built Machines Caterpillar


Unit Injector - Remove

Usage:

TK711 101

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
367-3070  喷油器安装工具和拆卸工具 

开始:

  1. 拆下气门机构盖。 请参阅拆解和组装, "气门机构盖 - 拆卸和安装"。


注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 拆下缸盖尾部的螺塞。 拆卸单体喷油器之前,让发动机机油从缸盖孔中排出。


    图 1g01148880

  2. 使用小号平头改锥从单体喷油器 (1) 断开线束组件 (2)。

  3. 拆下内六角头螺栓 (3)。


    图 2g03030620

  4. 安装工具 (A)。 用工具 (A) 将单体喷油器 (1) 从缸盖上拆下。

    注: 不要使用钢丝刷清理单体喷油器顶部。 将会导致单体喷油器损坏。



    图 3g01137291

  5. 从单体喷油器 (1) 上拆下 O 形密封圈 (6)、 (7) 和 (8)。 从单体喷油器 (1) 拆下支承环 (4)、 (5) 和 (9)。

Caterpillar Information System:

793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Stick - Install
769D Off-Highway Truck/Tractor and 771D Quarry Truck Circuit Breakers - Reset
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install - Two Cylinder
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Install
793D Off-Highway Truck/Tractor Slack Adjuster (Front) - Remove
2005/02/28 A New Fuel Return Line is Now Used {1274}
R2900G Load Haul Dump Machine Systems Hydraulic Tank - Install
R2900G Load Haul Dump Machine Systems Hydraulic Tank - Remove
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System Lubrication Pump
R2900G Load Haul Dump C15 Engine Supplement Radiator - Install
R2900G Load Haul Dump C15 Engine Supplement Radiator - Remove
793D Off-Highway Truck/Tractor Slack Adjuster (Rear) - Install
C9 Engines for Caterpillar Built Machines Unit Injector - Install
793D Off-Highway Truck/Tractor Solenoid Valve (Air Start) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
2005/03/07 New Clamp for the Water Lines {1380}
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2005/03/07 Improved Alternator Adjusting Rod {1405}
2005/03/07 Improved Alternator Adjusting Rod {1405}
834H Wheel Dozer and 836H Landfill Compactor Power Train Modulating Valve (Torque Converter Impeller Clutch) - Remove and Install
2006/09/11 A New Exhaust Bypass Valve (Wastegate) is Used {1057}
RM-300 Soil Stabilizer Sound Information and Vibration Information
Load Haul Dumps Machines , and Underground Articulated TrucksAutomatic Lubrication System Automatic Lubrication System Air - Purge
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.