Wheel Hub - Non-powered Axle
Show/hide table
Illustration 1 | g01135107 |
(1) Apply 5P-3413 Pipe Sealant to the threads of the 3B-8489 Grease Fitting threads.
(2) Apply 5P-3413 Pipe Sealant to the 1B-5174 Pipe Plug threads.
(3) Tighten 082-1618 Nut until all bearing end play is removed.
(4) Tighten the nut to the next place in order to insert the 3B-4647 Cotter Pin.
(5) Apply 8T-9014 Silicone Sealant to the outer edge of the 108-6604 Cap.
(6) Apply 9S-3263 Thread Lock Compound to the threads of the 8T-4136 Bolt.
Caterpillar Information System:
793D Off-Highway Truck Belts - Inspect/Adjust/Replace
793C Off-Highway Truck Machine Systems Tire and Rim (Front) - Install
793C Off-Highway Truck Machine Systems Tire and Rim (Front) - Remove
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Install
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Disassemble
C11 and C15 Engines for Caterpillar Built Machines System Configuration Parameters
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Engine Oil Pump - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
R2900G Load Haul Dump Steering System Wheel Steering System
735 and 740 Articulated Trucks Torque Converter and Transmission Oil Sample - Obtain
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
583T Pipelayer Power Train Brake Control Valve - Disassemble
2005/01/10 Use Thread Lock Compound on the Bolts of the Fan Drive {1359, 7553}
583T Pipelayer Power Train Brake Control Valve - Assemble
2013/09/02 A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Engine - Remove
C11 and C15 Engines for Caterpillar Built Machines E096 High Fuel Pressure
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Electronic Control Module (ECM)
2005/01/10 New Guards for the Aftercooler Temperature Sensor {1063, 1906}
AP1055D and BG2455D Asphalt Pavers Engine Supplement Radiator, Air Cooler, and Hydraulic Oil Cooler - Install
740 EJECTOR Articulated Truck Ejector System and Brake System Oil - Change
740 EJECTOR Articulated Truck Ejector System and Brake System Oil Level - Check