Air Conditioning E13 - Fresh Air Sensor (Open Circuit)
参考关于传感器的正确位置，请参阅系统操作, "空调系统"。
- 测量新鲜空气传感器的电阻值。 请参阅"技术参数"。 转至步骤 2。
- 如果电阻值不正确，请参阅步骤 3。 如果电阻值正确，请参阅步骤 4。
- 更换新鲜空气传感器。
- 断开传感器上的接头，并测量接头 OR/BU 和 GY/YL 间的电压。 请参阅"技术规格"。 转至步骤 5。
- 如果电压值不正确，请参阅步骤 6。 如果电压值正确，请参阅步骤 7。
- 检查并修理接头和控制面板间的线束。 另外，检查系统电源。
- 安装传感器，并测量控制面板端子 10 和 14 间的电压。 请参阅"技术规格"。 转至步骤 8。
- 如果电压值不正确，请参阅步骤 9。 如果电压值正确，请参阅步骤 10。
- 检查并修理接头和控制面板间的线束。
- 更换控制面板。
新鲜空气传感器内的电阻
- 0 °C (32 °F) ... 1.645 kΩ
- 25 °C (77 °F) ... 5 kΩ
接头间的电压 ... 5.0 V
端子间的电压
- 10 °C (50 °F) ... 2.00 V
- 20 °C (68 °F) ... 1.49 V
- 25 °C (77 °F) ... 1.25 V
- 30 °C (86. °F) ... 1.06 V
- 20 °C (68 °F) ... 1.49 V
Caterpillar Information System:
R2900G Load Haul Dump Steering System General Information
R2900G Load Haul Dump Hydraulic System Ride Control System
R2900G Load Haul Dump Hydraulic System Main Hydraulic System
2005/01/24 Correction to Disassembly and Assembly , "Assemble Brake, Steering and Pilot Pump" {4306}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Position Sensor for the Lift Linkage (Operator Monitor) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Steering Cylinder - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Position Sensor for the Joystick Control (Operator Monitor) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Seat - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Seat - Remove
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Remove
C15 and C18 Engines for Caterpillar Built Machines Coolant Flow Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines Crank Without Inject Circuit - Test
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Heating System Troubleshooting
C9 Engines for Caterpillar Built Machines Gear Group (Front) - Time
Procedure to Replace the Charge Pump on Paving Compactors{4306, 5073} Procedure to Replace the Charge Pump on Paving Compactors{4306, 5073}
735, 740 and 740 EJECTOR Articulated Trucks Braking System Service Brake - Check and Adjust
784C and 785C Off-Highway Truck/Tractors Seat Belt
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Hydraulic Generator - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Specifications
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Radiator Group - Remove
TH580B Telehandler Hydraulic System Piston Pump (Implement and Steering)