Hydraulic Generator - Install
Installation Procedure
- Attach a suitable lifting device on hydraulic generator (15) and install hydraulic generator (15). The weight of hydraulic generator (15) and piston motor (4) is approximately 155 kg (341 lb). Remove the suitable lifting device.
Show/hide table
 | |
| Illustration 1 | g01133842 |
Show/hide table
 | |
| Illustration 2 | g01133844 |
- Install bolts (16). Torque bolts (16) to 45 ± 5 N·m (33 ± 4 lb ft).
- Install ground cable (12) .
Show/hide table
 | |
| Illustration 3 | g01133806 |
- Remove bolts (14) and cover (13) .
Show/hide table
 | |
| Illustration 4 | g01133807 |
- Install cables (11) and the locknut. Connect all necessary harness assemblies (10) .
Show/hide table
 | |
| Illustration 5 | g01133802 |
- Install plate (9) and bolts (8) .
Show/hide table
 | |
| Illustration 6 | g01133764 |
- Install cover (7) and bolts (8) .
Show/hide table
 | |
| Illustration 7 | g01133763 |
- Position hose assemblies (5) and install hose clamp (6) .
Show/hide table
 | |
| Illustration 8 | g01133762 |
- Connect hose assemblies (5) to piston motor (4) .
Show/hide table
 | |
| Illustration 9 | g01133754 |
- Install support (2) and bolts (1) .
Show/hide table
 | |
| Illustration 10 | g01133777 |
- Connect harness assembly (3) .
Caterpillar Information System:
784C and 785C Off-Highway Truck/Tractors Seat Belt
735, 740 and 740 EJECTOR Articulated Trucks Braking System Service Brake - Check and Adjust
Procedure to Replace the Charge Pump on Paving Compactors{4306, 5073} Procedure to Replace the Charge Pump on Paving Compactors{4306, 5073}
C9 Engines for Caterpillar Built Machines Gear Group (Front) - Time
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Heating System Troubleshooting
C7 and C9 Engines for Caterpillar Built Machines Crank Without Inject Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Coolant Flow Switch Circuit - Test
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning E13 - Fresh Air Sensor (Open Circuit)
R2900G Load Haul Dump Steering System General Information
R2900G Load Haul Dump Hydraulic System Ride Control System
R2900G Load Haul Dump Hydraulic System Main Hydraulic System
2005/01/24 Correction to Disassembly and Assembly , "Assemble Brake, Steering and Pilot Pump" {4306}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Specifications
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Radiator Group - Remove
TH580B Telehandler Hydraulic System Piston Pump (Implement and Steering)
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Quick Coupler - Lubricate - If Equipped
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Quick Coupler - Check - If Equipped
735 and 740 Articulated Trucks Engine Oil Level - Check
TH580B Telehandler Hydraulic System Compensating System
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Rated Load
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Motor (Hydraulic Generator) - Install
C7 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston